Bedienungsanleitung Solac PV2010 (Seite 12 von 86) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

488723

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

MAIN COMPONENTS

• Always store the iron in a vertical position on its stand, resting it on a stable surface.

• The iron must not be used if it has been dropped, or if there is any crack or leak in the

water tank. If you observe any of these problems, take the iron to a T.A.S. approved by

the manufacturer.

• Do not leave the appliance unattended when switched on.

• The soleplate can get very hot when the appliance is in use. During operation, do not

touch the soleplate and only hold the iron by its handle, and ensure the cord does not

come into contact with the soleplate

CAUTION! When you want to dispose of the appliance, NEVER throw it in the

rubbish bin. Take it to the CLEAN POINT or waste collection centre closest to your

home for processing. You will thus be helping to take care of the environment.

MAIN COMPONENTS

BEFORE STARTING TO IRON

, Always make sure the soleplate protector has been removed before starting to

iron.

, Due to the high levels of mains water hardness in most areas, Solac recommends that

you always use demineralised water for ironing. In this way, you will guarantee that

your iron remains in optimal condition for a longer period of time.

, If, for any reason, you cannot find demineralised water, please ensure you use water

with a low mineral content (soft water), or filter tap water using a water filter.

, Do not use decalcifying agents or descaling products in the water tank. Do not

use scented water or ironing water either. These products damage the interior of

the steam generation system.

1 With the iron unplugged from the mains, rotate the steam selector (10) to the closed

position (fig. 2).

2 Open the water filler opening (5). Fill the water tank without exceeding the maximum

level, using the water beaker provided (12) and keeping the iron in the vertical position

(Fig. 1). When the tank is full, close the cap.

) When filling the tank, make sure that the water does not overflow from the water filler

opening.

3 Check whether the garment to be ironed has a label indicating the ironing temperature.

) We recommend you classify the garments according to their required ironing

temperature and begin with the garments ironed on the lowest temperature (•).

, NOTE: Ironing delicate garments at a temperature higher than necessary spoils the

fabric and causes burnt residue to stick to the soleplate.

1 Main body

2Power cord

3 Metal soleplate

4 Spray outlet

5 Water filler opening

6 Water tank

7 Spray button

8 Supersteam button

9 Temperature selector

10 Steam/Self-clean selector

11 Temperature pilot light

12* Water beaker (only model PV2210)

SYNTHETIC FIBRES, minimum temperature (•)

SILK, WOOL, medium temperature (••)

COTTON, high temperature (•••)

LINEN, MAX temperature

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac PV2010 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info