Bedienungsanleitung Solac PV2210 (Seite 13 von 86) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

488724

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

USE 13

, If you have any doubts about the temperature to use for a given garment, perform a

test on a part, which will not be visible, beginning with the lowest temperature settings.

USE

) This appliance has been designed exclusively for ironing clothes. Do not use it for any

other purpose.

) Completely remove all the elements use for transportation and packaging.

n If the appliance is hot, handle it with care and do not touch the metal soleplate.

Never leave the iron in a horizontal position when the soleplate is hot. Rest it on its rear end.

n Take care with the steam; do not aim it at people, animals or delicate objects.

n Always iron on stable, solid and smooth surfaces.

) For very delicate garments, place a cloth between the iron and the delicate garment to

avoid potential markings from the soleplate.

1 Extend the cord completely and plug it into the mains. The temperature pilot light will

turn on (11). Place the iron in the vertical position.

2 Select the desired operating temperature according to the garment you wish to iron

(see “TEMPERATURE SELECTION (fig. 4)”).

3 Select steam ironing (medium or maximum ) or dry ironing , as appropriate

(see “STEAM SELECTION”).

4 Hold the iron by the handle, and slide the soleplate over the garment to be ironed.

5 After using the iron, set the steam selector (10) to the closed position and the

temperature selector (9) to position 0.

6 Unplug the power cord from the mains.

7 Empty the water tank (see “EMPTYING THE WATER TANK”).

Wait until the iron is completely cold and store it in the vertical position in a safe place.

BEFORE FIRST USE

) Before using it for the first time, use the appliance to iron an old cloth or clothing, to

clean the system.

1 Set the temperature selector (9) to the Max position and wait a few minutes for the iron

to reach the appropriate temperature (the temperature pilot light will go out).

2 Rotate the steam selector (10) until it is in the completely open position (fig. 3):

steam will start to come out of the orifices in the soleplate.

3 Hold the iron by the handle and slide the soleplate over the old towel.

4 When the water tank is empty, no more steam will be produced. The iron is ready for use.

) Do not worry if the iron gives off a little smoke when used for the first time. This will go

away quickly.

TEMPERATURE SELECTION (fig. 4)

1 Turn the temperature selector (9) until it is in the desired position.

) When changing the position of the temperature selector (9), to either increase or

reduce the temperature, several minutes must pass before the iron reaches the

selected temperature.

) When the selected temperature is reached, the pilot light will go out (11).

STEAM SELECTION

, To obtain steam, set the temperature selector (9) between the levels •• and Max,

depending on the garment to be ironed.

The iron has 3 steam positions (dry ironing , medium steam flow or maximum steam flow

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solac PV2210 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info