611384
11
Zoom out
Zoom in
Vorherige Seite
1/61
Nächste Seite
11
Oscillation selector: The appliance is designed to oscillate horizontally and
thus to efficiently ventilate large areas.
For this, you will need to press the oscillation button (3). If you press it again,
the fan will stop oscillating and remain in the same position.
Operating modes: The fan operates by default in “normal” mode. Press the
operating mode selector (5) once for the fan to start working in “nature
mode and twice is you want it to work in “night” mode. To return to the
“normal” operating mode, press the mode selector a third time and the pilot
lights that show the operating mode will go off.
Stop timer: It is possible, while the fan is working, to set it to stop auto-
matically after a preset time has passed. The fan can be programmed to stop
after 30 minutes and up to 7 hours and 30 minutes, at thirty-minute inter-
vals.
Press the stop timer (4) once to set the timer for 30 minutes starting at that
time. After this time has passed, the appliance will stop working. Likewise,
every time you press the timer (4) will delay the automatic stop of the ap-
pliance by 30 minutes. The selected time will be shown by the pilot lights
in the screen (8). (Fig. 6)
To deactivate the timer function, press the stop timer (4) once more after
selecting 7 hours and 30 minutes.
REMOTE CONTROL OPERATION
The remote control unit operates with two 1.5 V LR-03 AAA alkaline batter-
ies. It is advisable to remove the batteries from the unit if it is not going to
be used for more than one month Do not mix old and new batteries.
You can use the remote control to select the same functions as with the
buttons on the actual fan. Follow the instructions given in the previous sec-
tion.
The range of the remote control unit is up to 6 metres from the fan. Point
it straight at the front of the fan to ensure good transmission.
The fan will make a “beep” noise, and the lights on the digital screen will
light up, confirming that the device has received the instructions sent
through the remote control unit.
CLEANING AND MAINTENANCE
Your appliance must be disconnected from the mains before any cleaning
operation is performed.
Clean with a slightly damp cloth.
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Solac VT8830 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info