Bedienungsanleitung Solis 1010 - Primaroma (Seite 39 von 56) (Deutsch, Englisch, Französisch, Italienisch)

663496

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

7776

– Push the portaﬁlter up, against the brewing head, and turn the handle counter

clock wisely to the right until you feel some resistance and the handle is in the

LOCK position. The handle will then roughly be in a 90 ° angle to the machine.

– Place a cup on the drip tray under the portaﬁlter outlets (before the ﬁrst use, take

a larger tank).

– Check if the selector is set to the standby position in the center l.

– Plug the power plug into a suitable wall power outlet.

– Press the ON / OFF button, the appliance is now switched on and the red function

light illuminates.

– Also check if the function button is not pressed in and is set to the brewing

position . Once the machine has reached operating temperature, the green

temperature control light will light up permanently and the appliance is ready for

use.

– Now, turn the selector left to the cup position : the hot water will ﬂow out of

the portaﬁlter.

Before the ﬁrst use, let the water of the ﬁlled water tank run through (if necessary,

empty the tank placed on the drip tray multiple times!). When using the appli-

ance again afterwards, it should be enough to let water run through for approx.

20 seconds to warm up the appliance parts.

– Then, turn the selector back to the standby position in the center l, the water

ﬂow stops.

– Turn the portaﬁlter handle clock wisely to the left, towards INSERT.

– Pull portaﬁlter and ﬁlter insert downwards and out.

CAUTION: Both parts are hot, do not scald yourself.

– Your appliance is now ready for making espresso.

NOTE: When water is pumped through the appliance for the ﬁrst time, air getting

into the appliance might cause a slightly louder noise. After approx. 20 seconds the

noise will go away.

s

ESPRESSO MAKING

WITH YOUR SOLIS PRIMAROMA

NOTE: Check the water level in the water tank before every use. Change the

water daily. Fill the water tank with fresh, cold tap water before every use.

Do not use any distilled water, soda or other liquids.

FILLING THE FILTER INSERT WITH GROUND COFFEE

AND TAMPING

– Choose the right ﬁlter insert: Use the smaller ﬁlter for 1 cup and the larger ﬁlter

for 2 cups. If you want to make a big cup of coffee, please use – depending on

the desired intensity – the ﬁlter insert for 2 cups and let more water run through.

– Wipe the ﬁlter insert clean with a dry cloth.

– Place the ﬁlter insert in the portaﬁlter (watch out for bulge in ﬁlter insert and

notch in portaﬁlter!).

– Fill the ﬁlter insert with ground coffee. Count 1–2 measuring spoons per cup.

– Gently tap the portaﬁlter against the worktop so that the ground coffee in the

ﬁlter insert is spread out evenly. Use the tamper to compress the ground coffee.

– After tamping, remove coffee leftovers from the portaﬁlter edge so that it can be

correctly attached to the brewing head.

INSERTING THE PORTAFILTER

– Attach the portaﬁlter to the brewing group:

Hold the portaﬁlter under the brewing head so that the handle is located to the

left, under the INSERT marking.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 1010 - Primaroma Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Solis 1010 - Primaroma

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info