8180
ANION BUTTON FOR ACTIVATING THE ION FUNCTION (7)
• With the "anion" button, you can activate the negative ion generator to addi-
tionally remove dirt particles and bacteria from the air.
• The display (3) illuminates.
SLEEP BUTTON FOR ACTIVATING NIGHT MODE (8)
• With the "sleep" button, you can activate night mode, meaning all displays
(except for the night mode and power supply displays) go out and the humidi-
fication power is set to a low level.
TIMER BUTTON FOR ACTIVATING THE
TIMER FUNCTION (13)
• With the "timer" button you can determine the operation time of the Solis 3 in
1 Airwasher Ionic. Every touch of the "timer" button increases operation time
by one hour, you can set the operation time between 1 and 8 hours. The con-
trol panel will state the set number of hours (12) and count down. After the set
time has elapsed, the appliance automatically switches off.
LIGHT BUTTON FOR ACTIVATING BACKLIGHT (14)
• By pressing the "light" button, you can switch the control panel backlight on and
off.
ACTIVATING CHILD SAFETY MODE (13 + 14)
• Simultaneously touching both the "timer" (13) and the "light" (14) button for
3 seconds will activate child safety mode. Now, no further changes can be made
to the appliance settings and the buttons will no longer react to being touched.
The display will indicate that the child safety mode is switched on (11).
• If you wish to deactivate child safety mode, touch the buttons "timer" and
"light" again for 3 seconds and the display for child safety mode (11) will go out.
The following displays illuminate even when you have not activated a
function:
• "CURRENT HUMIDITY" display (4)
The "CURRENT HUMIDITY" display illuminates once the appliance has been acti-
vated with the "power" button and displays the current degree of relative humid-
ity in the room:
LOW – room humidity is low, below 40%
LOW and MID – room humidity is intermediate, between 40% and 60%
LOW, MID and HIGH – room humidity is high, above 60%
NOTE: The humidity switch built into the appliance measures humidity directly
at the appliance. Another humidity switch, placed outside of the appliance, might
show a different humidity value.
• "WATER SHORTAGE" display (5)
Should the water level in the water basin fall below the minimum, the display
"WATER SHORTAGE" (5) will illuminate on the control panel and the appliance
will automatically switch off.
