Bedienungsanleitung Solis 7217 - Ultrasonic Pure (Seite 41 von 57) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

708830

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

8180

In our example this would mean: Should the room humidity fall under 45%, the

appliance would switch back on 10 seconds later and restore the humidity to 50%.

Note: When the appliance is turned on (regardless of whether the power

supply has been disrupted or not) it will start operating for at least 2 minutes

to meter current air humidity, even if effective air humidity is above the set

value. After that, the appliance will either keep operating – if the value is

below 45%, as in our example – or discontinue operation – if the value is

above 50%, as in our example.

Memory function:

If the air humidiﬁer is turned on and power has not been disconnected since last

programming of air humidity, the programmed value is saved and the appliance will

humidify the air of the room according to this last programmed value.

If the power supply has been interrupted, the previously set humidity value is de-

leted. In this case, the appliance humidiﬁes up to the factory-set standard value

of 68% and would require reprogramming by yourself should another value be

desired.

Setting the automatic function:

If you touch the

-button for 3 seconds, the appliance switches to automatic

mode. The appliance registers the current room humidity and brings resp. keeps

the humidity constant between 55% and 68%. The appliance selects the functions

optimal for this purpose itself, depending on the current ambient temperature and

humidity. No manual settings for room humidity or humidiﬁcation output can be

made in this function.

WARM MIST FUNCTION BUTTON (E)

When you touch this button, you can activate the warm mist function. You can also

increase or decrease the humidiﬁcation output within the 3 possible intensities with

the button

in the warm mist function.

Please note: The higher the humidiﬁcation output setting is in the warm mist func-

tion, the warmer the steam is. The warmer the steam is, the higher is the humidi-

ﬁcation output in turn. Therefore, the humidiﬁcation output is generally higher for

warm mist than for cold mist.

If you touch the button

another time, you can switch the warm mist function off

again, making the appliance only work with cold mist.

 THINGS WORTH KNOWING ABOUT THE

FUNCTIONS OF YOUR HUMIDIFIER

ON/OFF BUTTON (B)

Once you plug the power plug into the power outlet, a signal sounds and the ap-

pliance switches to standby mode, the LED display lights up brieﬂy and goes out

again. If you touch the ON/OFF button, the LED display and the blue LED light on

the appliance base light up and the humidiﬁer is ready for use. Touch the ON/OFF

button another time and the appliance switches back to standby mode.

HUMIDIFICATION OUTPUT BUTTON (C)

With this button, you can adjust the humidiﬁcation output yourself – choose from 3

output levels: each bar beneath the number represents an output level. Each touch

of the button increases the intensity. If one bar lights up, the lowest output level is

selected. If three bars light up, the highest output level is selected. After the highest

output level, the appliance switches back to the lowest output level if the button is

touched again. If you have not activated the warm mist function, cold mist escapes

from the outlets.

BUTTON FOR MANUAL HUMIDITY SETTING

AND AUTOMATIC FUNCTION (D)

Manually setting the humidity:

You can set the desired humidity value by a short touch of this button: The appli-

ance measures the current room temperature, brings it to the set value and then

constantly holds it there. Values between 40% and 80% are possible and can be

adjusted in steps of 5%. Every touch increases the value and is shown in the display.

After 80%, the value jumps back to the neutral setting and then starts again at

40%. After programming, the display goes back to showing the current ambient

humidity resp. temperature. As soon as you have entered a value, the appliance

starts humidifying for at least 2 minutes, regardless of whether the set value is above

or below the actual room humidity. The appliance switches off after these 2 minutes

have elapsed, provided the actual room humidity lies above the set value.

An example: If you set a room humidity of 50%, the appliance checks the ambient

humidity for 2 minutes while humidifying at the same time. Should the room hu-

midity lie under the set 50% (minus tolerance) after the 2 minutes have elapsed,

the humidiﬁer keeps working. Should the room humidity be at 50% or above, the

appliance stops working.

The appliance is equipped with a built-in humidity switch, guaranteeing

that user programmed air humidity is permanently maintained. The humid-

ity switch checks the humidity constantly at intervals of 10 seconds. Should

the effective humidity fall 5% under the value chosen by you, the appliance

switches on. This tolerance is picked deliberately to keep the appliance from

turning on and off frequently and disturbingly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 7217 - Ultrasonic Pure Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info