▲
IMPORTANT SAFETY PRECAUTIONS
Please read through this user manual thoroughly before using your Solis Twist
and Mix Blender Pro, so that you become familiar with your appliance and
can use it safely. We thoroughly recommend that you keep these instructions
and, if you pass the appliance on, that you also hand these instructions to the
new owner.
For your own safety, please observe the following safety measures when
using elec trical appliances:
1. To prevent electric shock, neither the motor base nor the power cord or plug must
come into contact with water or other liquids. Water can enter the housing and
damage the appliance! Should the motor base resp. the power cord or plug come
into contact with liquids, use dry rubber gloves to pull the power plug from the
socket.
2. Do not operate or unplug the appliance with wet or moist hands or feet.
3. Before using the appliance, check that the voltage stated on the appliance
matches your mains voltage.
4. Place the appliance while in function on a solid, stable, clean and dry surface, like
a table. Vibration during operation may cause the appliance to move. Therefore
do not place the blender near the edge of a bench or table during operation.
Do not use the appliance outdoors.
5. Do not leave the power cable hanging over table edges so that it can be pulled.
Make sure that it does not come into contact with hot surfaces, such as hotplates
or a radiator, or that it comes into contact with the appliance. Fully unwind the
cord before use.
6. Keep the appliance away from hot gas, hot ovens and other heat-emitting appli-
ances or heat sources. Never use the appliance on a hot or wet surface. Never
place the appliance near moisture, heat and naked flames. Keep the appliance
away from moving parts or appliances.
7. Never carry the appliance by the power cable and do not place it on the power
cable.
8. We recommend that you do not use an extension cable with this appliance. Do
not place the appliance directly underneath a power socket.
9. Unplug the appliance when it is not in use or unattended and before cleaning.
We recommend the use of a residual current device (RCD safety switch) to ensure
additional protection during the use of electrical appliances. It is advisable to use
a safety switch with a rated residual operating current of 30 mA maximum. For
professional advice consult an electrician.
70
SOLIS Twist Mix E This_2015 24.02.15 11:33 Seite 70
