Bedienungsanleitung Solis 8371 (Seite 56 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

708815

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

111110

GB GB

5. REMOVING THE ATTACHMENTS FROM

THE BLENDER SHAFT

●

You have to remove the attachment at the end of the mixing process. This is

done exclusively with the included key (S) – never attempt to remove the attach-

ments by hand, you might be seriously injured!

●

Make sure that the power plug is not plugged into the power socket.

●

Hold the handle of the key and push the fork of the key under the attachment

and against its shaft. You can hear a faint “Click”.

●

Lever the blade attachment up with the help of the key – the attachment dis-

engages from the foot of the blender shaft. Point the foot of the blender away

from you to prevent the attachment from being launched into your direction or

even your face.

●

Carefully hold the attachment in one hand and the key in the other hand. Turn

the key to the position “K” and lift the attachment off.

●

You can place the cleaned attachment and the key in the accessory box.

●

Be careful when touching the blades with your hand – they are extremely sharp.

“Click”

push

turn

pull

4. STARTING TO USE THE BLENDER

●

Only now plug the power plug of the completely unwound power cord into a

suitable power outlet. The LCD screen lights up, indicating that the speed setting

is 1 by displaying a 1.

●

Vertically insert the blender into the blender jug. Only the blender shaft must be

placed in the liquid or food you wish to blend, not the motor unit!

●

Avoid tilting the blender.

●

Use the + or − button to select a speed between 1 and 16. You can read the

current setting from the screen.

You can adjust the speed up or down with the + resp. − button, there are

16 speed settings to choose from. Each press of the button will increase resp.

reduce the speed by one step. If you press and hold the button, the steps are

quickly counted up or down. The current speed is displayed on the screen.

●

If the correct speed setting is displayed, push the ON/OFF button into the posi-

tion I and hold it there. The blender is only switched on while you keep the ON/

OFF button held down. As soon as you let go of it, the blender stops.

●

Start blending and shredding by making small movements up and down and

slightly turning the blender back and forth.

●

The operation time is counted up on the LCD screen in seconds and minutes.

●

If you want to change the speed while blending, release the ON/OFF button and

reset the speed with the + and − buttons. After that, push the ON/OFF button

back to the position I.

●

If you want to quit blending, let go of the ON/OFF button and wait for the

attachment to come to a complete standstill. Only then pull the blender out of

the mixture to prevent food splashing out of the blender jug.

●

Pull the power plug out of the power socket

Note: After 9 minutes and 59 seconds, the display switches back to 00 seconds

and the appliance switches off automatically. However, you should never use

the blender for more than 1 minute; if you wish to chop very hard foods,

do not use it for more than 10 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 8371 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info