Bedienungsanleitung Solis Prestige Blender Type 837 (Seite 49 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

506312

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

The inner lid can be removed to add ingredients or

check the texture of ingredients.

The Solis Prestige Blender features a Lid. This allows

the lid to ﬁt tightly onto the blender jug, avoiding

displacement during operation. The ring pull design

allows the user to easily remove the lid with a

simple leverage action. (See Fig 2)

Step 5.

Plug the power cord into a 230V power outlet and

switch on.

Step 6.

Press the ‘Power’ button on the far left of the

control panel to turn the blender on. The ‘Power’

button will illuminate and ﬂash. The LCD timer

screen will illuminate with ‘00’ displayed.

Do not ﬁll the blender jug above the ‘MAX’ line.

When the blender jug is ﬁlled at or near the ‘MAX’

line place one hand on the blender lid to avoid

displacement of the lid during operation.

Step 7.

Select the required speed (1 to 5) by pressing the

corresponding speed button. The blender will start

to operate and the selected speed button will illumi

nate. The ‘Power’ button will illuminate and cease to

ﬂash. The ‘Stop’ button will illuminate and ﬂash. The

LCD timer screen will start counting upwards in one

second increments until 120 seconds is reached.

Operate the blender only for the appropriate

amount of time required – do not over blend.

Step 8.

When 120 seconds is reached, the blender will au

tomatically cease to operate and the selected speed

button and ‘Stop’ button illumination will go out.

The ‘Power’ button will illuminate and ﬂash. After a

few seconds the LCD timer screen will revert to ‘00’.

•

The Solis Prestige Blender will automatically stop

blending after 120 seconds (2 minutes). This is

a safety feature and restricts wear on the motor.

•

To stop blending at any time, press the ‘Stop’

button or the selected speed button. The Power’

button can also be pressed, but this will also turn

the appliance off and all illuminations will go out.

•

The speed can be changed at any time during

the blending process. Each time a new speed is

selected its button will illuminate and the previous

speed button illumination will go out. The number

of seconds on the LCD timer screen will continue

to count upwards to 120 seconds unless inter

rupted.

Step 9.

The

Solis Prestige Blender features two additional

functions, ‘ICE CRUSH’ and ‘SMOOTHIE’. These are

pre-programmed cycles which automatically adjust

the blending time and speeds to improve blending

results. Select the required function by pressing the

corresponding function button. The blender will start

to operate and the selected function button will illu

minate. The ‘Power’ button will illuminate and cease

to ﬂash. The ‘Stop’ button will illuminate and ﬂash.

The LCD timer screen will start counting downwards

in one second increments until ‘00’ is displayed.

The smoothie function has a processing technique

that blends the denser ingredients at a lower

speed, then increases as ingredients thicken. This

may happen several times while blending smoothies.

When ‘00’ seconds is reached, the blender will

automatically cease to operate and the function

button and ‘Stop’ button illumination will go out.

The ‘Power’ button will ﬂash.

Fig. 1

Fig. 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis Prestige Blender Type 837 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info