25
• Controllate che la guarnizione del coperchio del
contenitore o del coperchio universale sia collocata
correttamente nel posto giusto e non sia
danneggiata.
I contenitori SOLIS o i Coperchi Universali
SOLIS non mantengono il vuoto
• Assicuratevi che la manopola del coperchio del
contenitore sia posizionata su «VACUUM» prima di
effettuare il vuoto nel contenitore e che sia
posizionata su «CLOSED» dopo aver fatto il vuoto.
• Controllate che l'O-ring sotto la manopola del
coperchio del contenitore o del coperchio
universale sia al proprio posto correttamente
posizionato.
CONTENTS
– APPLIANCE NAMES
and FUNCTIONS page 25
– IMPORTANT SAFEGUARDS page 26
– OPERATING INSTRUCTIONS page 27–29
• Making bags from SOLIS rolls page 27
• Vacuum packing with SOLIS bags
cut from a roll or pre-cut bags page 28
• Vacuum packing in SOLIS containers
or with SOLIS Universal Caps page 28
APPLIANCE NAMES and FUNCTIONS
See illustrations on page 1.
(1) Vacuum gauge – It turns from yellow to green
when a vacuum has been achieved.
(2) Vacuum level – Turn the knob clockwise to
increase the vacuum and counterclockwise to
decrease it.
(3) LOCK buttons – In the locked position they
secure the lid in place while the vacuum packing
cycle is under way in bags, jars and containers, they
release automatically.
(4) Tube air inlet – To insert the connection tube to
jars, containers, universal caps, bottle caps etc.
(5) Sealing time – Turn the knob clockwise to
increase the sealing time and counterclockwise to
decrease it.
(6) Manual vacuum button «MAN VAC» –
Pressing this button will cause the vacuum pump to
work continuously and cancel the preselected dial
setting (2).
(7) «MAN SEAL» Manual seal button – Pressing
the button will immediately trigger the sealing
process, cancelling the pre-selected vacuum setting
on the dial (2).
(8) ON(I)/OFF(0) switch – Press to turn on the
SOLIS MAXIMA, keep the switch on OFF (0) when
you are not using it.
(9) Sealing indicator light – When the sealing
process is under way, the yellow light turns on.
(10) Bag cutter – Press and slide in one direction or
another to cut bags of the desired size.
(11) Lid – The vacuum pump is activated by
pressing the two push buttons on the Lid.
(12) Filter – Protects the Pump against the entry of
dust and liquids that could damage it. The filter is
removable to allow easy cleaning. Pull the lid toward
you.
(13) Sealing gasket – It presses the bag on the
sealing bar.
(14) Airtight gaskets – They guarantee that a
vacuum will be maintained in the chamber, thus
allowing air to be removed from bags and containers.
(15) Bag compartment – For keeping a roll of bags
within reach and ready to use.
(16) Non-slip feet – They prevent the appliance
from slipping during use.
(17) Tray-shaped vacuum chamber – To position
the open end of the bag inside the chamber, draw air
from the bag and collect any excess liquid.
(18) Sealing bar – Teflon-coated heating element
that seals the bag and prevents it from sticking to the
bar.
• Vacuum packing in SOLIS Family
containers page 28–29
• Vacuum packing glass jars page 29
• Vacuum packing with SOLIS
bottle caps page 29
– CLEANING INSTRUCTIONS page 30
– TECHNICAL SPECIFICATIONS page 30
– ACCESSORIES page 30
– TROUBLESHOOTING page 31–32
SOLIS Maxima
THE VACUUM PACKING SYSTEM FOR PROFESSIONAL USE
We compliment you on your purchase and thank you for your confidence in us. You are advised to carefully read
these directions, which will enable you to use the SOLIS MAXIMA properly and obtain optimal results in terms of
food preservation. Furthermore, we suggest you keep these instructions handy for further reference.
I contenitori SOLIS Family non mantengono il
vuoto
• Controllate che la guarnizione sotto il bottone
centrale (20) del coperchio del contenitore sia al
proprio posto correttamente posizionata.
