Bedienungsanleitung Solis Ultrasonic Pure 7217 (Seite 44 von 57) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

686948

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

 CLEANING AND MAINTENANCE

1. CLEANING CHASSIS AND WATER TANK

• Always switch off the appliance and pull the power plug before cleaning.

• Let appliance cool down completely.

• Regularly clean the water tank using clean water (at least twice a week). Should

there be lime deposits in the water tank, add decalciﬁer suitable for air humidi-

ﬁers to the rinse water. Follow the directions on the bottle.

• Clean the outside of the appliance with a soft, slightly moist towel and, if nec-

essary, some mild dishwashing liquid. Never dip the appliance in water and do

not spray it with water or other liquids.

• Caution: Never use aggressive or caustic detergents or a scouring sponge.

The plastic chassis might be damaged.

2. CLEANING NEBULISER, HEATING ELEMENT

AND NEBULISER CHAMBER

Caution: Always let the appliance cool down completely

before cleaning the nebuliser, the heating element and

the nebuliser chamber.

• Pour the water remaining in the appliance out fol-

lowing the direction of the arrow (the arrow on the

ﬂoor of the nebuliser chamber).

• Clean the nebuliser chamber, the nebuliser mem-

brane and the heating element once a week with a

soft brush and water mixed with a little amount of

mild dishwashing liquid. Rinse everything with clear

water and then dry everything with a towel.

Should your water be so hard that white limestone deposits, which could

not be removed with water and dishwashing liquid, form on the heating

element and on the nebuliser membrane in spite of the descaling cartridge,

you should clean both with some water and a descaling agent suitable for

humidiﬁers.

• Put a small amount of descaling agent suitable for humidiﬁers on the heating

element and the nebuliser membrane and take note of the instructions on the

bottle. Then, ﬁll both with water and let everything sit for 10–15 minutes.

• Then use a soft brush to remove the limestone.

• Rinse nebuliser chamber, nebuliser membrane and heating element twice with

water.

Caution: Do not pour water directly into the nebuliser chamber except when

cleaning it!

Never use aggressive or scouring detergents or sponges – these might scratch the

surface and damage the nebuliser membrane.

ﬁg.12





Nebuliser membrane

Heating element

8786

4. TURNING OFF THE APPLIANCE

– Turn off the appliance with the ON / OFF button.

– Pull the power plug from the socket.

– Remove the water tank from the base and open the cap. Pour out the water and

rinse the tank. Also empty the nebuliser chamber.

– Let all parts dry and store away the appliance.

5. AUTOMATIC SHUTDOWN WHEN WATER TANK IS EMPTY

• Should the water tank be empty, a threefold acoustic signal sounds. The corre-

sponding

symbol lights up in the display while the remaining indicators go

out. The

appliance will automatically stop humidifying. In this case, turn off the

appliance with the ON / OFF button. Let the appliance cool down before pouring

any more water in the tank.

• Caution: The appliance and the water in the nebulisation chamber might be very

hot. When lifting the appliance or removing the water tank right after operation

you risk scalding yourself with the hot water!

• Ensure that the water tank is always completely reﬁlled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis Ultrasonic Pure 7217 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info