Bedienungsanleitung Solo 106 (Seite 21 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

634115

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Operating parts and functional parts

Fig. 1

1. Loop handle

2. Safety end-stop

3. Two-handed bike handle

4. Throttle

5. Half throttle detent

6. Stop switch

7. Cutter

8. Touch protection

9. Shoulder strap eyelet

10. Spark plug cap

11. Silencer

12. Tank cap

4.2 Work clothing

Fig. 3

1. To prevent injuries, always wear appropriate clothing

and safety equipment when working with this motorised

equipment.

2.This clothing should be practically oriented to the

application, (for example a tight fitting work suit) but

should not be confining.

3. Never wear a scarf, a tie, jewellery or other items of

clothing, which might get caught in the equipment, in

brush or on branches. Safely tie back long hair (use a cap,

helmet or similar).

4.Wear sturdy shoes with a good tread - ideally safety shoes.

Wear protective gloves with non-slip palms.

Use personal hearing protection, and or a face

protector for protection against flying objects or

objects caught up in the turbulence (protective

goggles for example).

Wear a helmet in high brush areas.

4.3 Refueling

Handling fuel requires care and consci-

entious behavior. You must observe

the safety directives!

4. Safety directives

4.1 General safety instructions

Read the operating instructions care-

fully before placing in service and

keep them in a safe place.

Use this power tool with particular caution.

1. Disregarding the safety instructions can result in life-

threatening hazard. Also comply with the accident pre-

vention measures of the Employers Liability Insurance

Association.

2. Have the sales person demonstrate and explain safe

operating procedures when working with such a power

tool for the first time.

3. The power tool may only be implemented in the desig-

nated application area and only for the specified applica-

tion purpose listed under chapter 8 “Using”.

4. Children and young people under 18 years may not

work with this power tool, with the exception of young

people over 16 years of age who are being trained under

supervision.

5. Keep bystanders and animals away from the working

area (Fig. 2). Maintain a minimum distance of 15 m. When

working near thickets, be aware that children and animals

may be hidden there. Immediately stop the machine and

the cutter if any person or animal comes close to the

working area.

6.The user is responsible for hazards or accidents that

arise relative to other people and their property.

7.This power tool may only be loaned or forwarded on to

people that are familiar with this type of equipment and

its operation. Always provide these operating instructions

along with the machine in these situations.

8.You should be in good mental and physical condition

when you work with this device, this means you should be

relaxed and healthy.

9.This device may not be operated if the operator is under

the influence of alcohol, drugs, medicine that can impair

his/her reaction capability.

10.The power tool may only be operated in an operation-

ally safe condition - accident hazard! To avoid starting the

motor unintentionally, always place the stop switch on „0“ if

the blower cover is open and remove the sparkplug connec-

tor before reaching into the device - even for cleaning.

10.b. Always stop the engine and remove the spark plug

cap when changing cutters to prevent unintentional

starting of the engine. 10.c. Always use the appropriate

touch protection with each cutter. 10.d. When using a

Line head, never replace a plastic line with a steel line.

11.Do not alter the existing safety fixtures and operating elements.

12.Only those accessories and attachments may be used

that have been supplied by the manufacturer and that are

expressly approved for attachment.

13.

Dependable operation and the safety of your device also depend

on the quality of the replacement parts used. Only use original replace-

ment parts. Only original parts are produced with the manufacturing

processes of the device and thus guarantee the highest possible quality

of material, dimensional integrity, function and safety. Original

replacement and accessory parts are available from your dealer. He also

has all the requisite replacement part lists to identify the necessary

replacement part numbers, and he is constantly updated with detail

improvements and innovations in our replacement part offering.

Please note as well that guarantee performances are not possible if

non-original replacement parts are used.

14.When this device is not being used, it must be stored in

such a manner, that no one is endangered. The motor

must be turned off.

15.The person who disregards these operating or mainte-

nance instructions is also liable for all resulting damages

and consequential damages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo 106 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info