Bedienungsanleitung Solo 425 Pro (Seite 26 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

655640

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

4 Mixing spraying agents and filling the spraying agent tank

ENGLISH 8

4 Mixing spraying agents and

filling the spraying agent tank

When handling the spraying agents, always

follow the safety instructions of these

operating instructions (pay special attention to

section 2.3) and the information provided by the

manufacturer of the particular spraying agent.

Spraying agent volume:

Mix the spraying agents according to the

instructions provided by the manufacturer of the

spraying agent. Choose the appropriate volume

according to requirements.

Mixing spraying agents:

Only mix spraying agents out in the open. Never do

this inside living spaces, stables or in storage

spaces that are used for food or animal feed.

Never mix the spraying agent directly in the

spraying agent tank.

Spraying agents in powder form:

x Mix the spraying agent in a separate container,

not in the spraying agent tank.

x Ensure that the mixture is thoroughly mixed

before pouring it into the spraying agent tank.

x Use the spray tube to thoroughly mix the

spraying agent in the tank.

Liquid spraying agents:

x Fill 1/4 of the spraying agent tank with clean

water.

x Pre-mix the spraying agent with clean water in a

separate container according to the instructions

provided by the spraying agent manufacturer.

x Pour the pre-mixed spraying agent into the

spraying agent tank.

x Top up with the required amount of clean water

according to the manufacturer's instructions.

x Use the spray tube to thoroughly mix the

spraying agent in the tank.

When using spraying agents that have been mixed

from herbal preparations, the liquid needs to be

pre-filtered.

Filling the spraying agent tank:

When filling the spraying agent tank always use the

filling strainer located in the filler neck of the

spraying agent tank and observe the total filling

process.

Avoid any direct contact of the filling hose and the

contents of the spraying agent tank.

Fill level markings are applied to the side of the

spraying agent tank.

When filling up the tank, ensure that you do not fill

above the top marking (maximum fill volume).

Never allow the spraying agent tank to overflow or

public bodies of water, rainwater drains or sewage

drains to become contaminated.

Immediately wipe up any spilled spraying agent.

Identification of the tank

contents:

Attach the relevant

sticker to the spraying

agent tank to indicate the

contents of the tank (i.e.,

herbicide, fungicide or

insecticide).

The designation of the

spraying agent used has

to be attached to the

device and has to be

updated every time when

the spraying agent is

changed.

CAUTION:

Never fill different spraying agents into the

spraying agent tank without first thoroughly

cleaning the tank and all parts that come into

contact with the spraying agent and flushing the

system with plenty of clean water.

Recommendation: Use the special SOLO cleaner

for plant protection sprayers (dosing bottle of

500 ml [approx. 16.9 oz], part no.: 4900600).

Never use aggressive, acid- or solvent-containing

cleaning agents (gasoline for example).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo 425 Pro Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info