Bedienungsanleitung Solo 425 Pro (Seite 30 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

655640

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

6 Maintenance, cleaning and storage / 7 Wearing part / 8 Warranty

ENGLISH 12

Cleaning the spray nozzle, the filter element and

the filling strainer:

x To depressurise the device, hold the spray tube

in the spraying agent tank or in a suitable

container for the spraying agent and operate the

shut-off valve until no more fluid is sprayed.

x Rinse the nozzle attachment with clean water.

x Disassemble the nozzle attachment .

x Clean the O-rings, the filter element, the spray

nozzle and the filling strainer with clean water

and a soft brush.

Never use your mouth to blow through the spray

nozzle! Never use hard objects to clean the

nozzles!

x Reassemble the components of the nozzle

attachment (Fig. 22).

6.8 Taking the sprayer out of service and

putting it into storage

Prepare the device for storage according to

section 6.7.

Store the device protected from sunlight in a

secure, dry and frost-free location under a

maximum ambient temperature of 35 °C [95 °F].

There must not be any open fires or similar

nearby.

Ensure that the unit cannot be used by

unauthorised persons, in particular children.

7 Wearing parts

Various parts are subject to application-specific

wear or to normal wear and must be replaced in

good time if necessary.

The following parts are subject to normal wear and

are not covered by the manufacturers guarantee:

x All rubber parts that come into contact with the

spraying agent

x Spray nozzle

x Filters

x Seals

8 Warranty

We warrant problem free quality and will cover the

cost of replacing parts which are found to be faulty in

material or show manufacturing defects within the

prescribed guarantee period after the date of

purchase.

Please note that specific guarantee conditions may

differ from country to country. When in doubt, please

ask the vendor of the goods. The vendor of the

product is responsible for guarantee applications.

We hope you will understand that we cannot be liable

for damage resulting from these causes:

x Non-compliance with operating instructions.

x Neglecting required maintenance and repair jobs.

x Wear from normal use (particularly: gasket seals,

membranes, collars, spray nozzles and filters).

x Using non-approved tools.

x Use of force, improper treatment, misuse and

accidents.

x Attempted adjustments and repairs by non-

qualified persons.

x Unauthorized modification or changes made to the

device.

x Use of unsuitable spare parts or non-original parts

if such parts are the cause of the damage.

x Use of non-approved media in the spraying agent

tank.

x Damage caused by using the product in the hire or

rental industry.

Normal cleaning, adjustments or maintenance jobs

cannot be claimed as part of the guarantee.

All guarantee work must be carried out by one of our

authorised service centres.

For Australia only: Supplementary warranty notes

specifically for Australia

To make a claim, contact Clayton Engineering, 26

French Ave, Brendale, Q, 4500 on phone 1300 798

022 or email sales@claytonengineering.com.au. You

will be asked to provide proof of purchase and then

will be instructed on the procedure for repairing or

replacement of the product under warranty. All costs

incurred for repair or replace, and additional claims

can be discussed at this stage.

This warranty is provided in addition to other rights

and remedies you have under law: Our goods come

with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a

replacement or refund for a major failure and for

compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the

goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to

a major failure.

Fig. 27

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo 425 Pro Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info