Bedienungsanleitung Solo 453 (Seite 19 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

655625

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

3 Mixing spraying agents and filling the spraying agent tank / 4 Using the pressure sprayer

ENGLISH 7

Spraying agent volume:

Mix the spraying agents according to the

instructions provided by the manufacturer of the

spraying agent. Choose the appropriate volume

according to requirements.

Mixing spraying agents:

Only mix spraying agents out in the open. Never do

this inside living spaces, stables or in storage

spaces that are used for food or animal feed.

Never mix the spraying agent directly in the

spraying agent tank.

Spraying agents in powder form:

x Mix the spraying agent in a separate container,

not in the spraying agent tank.

x Ensure that the mixture is thoroughly mixed

before pouring it into the spraying agent tank.

x Use the spray tube to thoroughly mix the

spraying agent in the tank.

Liquid spraying agents:

x Fill 1/4 of the spraying agent tank with clean

water.

x Then pre-mix the spraying agent with clean

water in a separate container according to the

instructions provided by the manufacturer of the

spraying agent.

x Pour the pre-mixed spraying agent into the

spraying agent tank.

x Top up with the required amount of clean water

according to the manufacturer's instructions.

x Use the spray tube to thoroughly mix the

spraying agent in the tank.

When using spraying agents that have been mixed

from herbal preparations, the liquid needs to be

pre-filtered.

Filling the spraying agent tank:

To fill the tank with spraying agent, remove the

pump by pushing the pump handle (3) down and

turning it to the left (counterclockwise) until the

handle clicks into position.

Unscrew the pump by turning it counterclockwise

(Fig. 5). Do not use any tools!

Avoid any direct contact of the filling hose and the

contents of the spraying agent tank.

Fill level markings are applied to the side of the

spraying agent tank (6).

When filling up the tank, ensure that you do not fill

above the top marking (maximum fill volume).

Maximum fill volume: 11.0 l [2.9 gal]

Never allow the spraying agent tank to overflow or

public bodies of water, rainwater drains or sewage

drains to become contaminated.

Immediately wipe up any spilled spraying agent.

After filling, insert the pump again and refasten

firmly by turning the pump handle (3) clockwise to

prevent the spraying agent from escaping.

Refasten firmly until the pump handle clicks into

position.

Identification of the tank contents:

The designation of the spraying agent used has to

be attached to the device and has to be updated

every time when the spraying agent is changed.

CAUTION:

Never fill different spraying agents into the

spraying agent tank without first thoroughly

cleaning the tank and all parts that come into

contact with the spraying agent and flushing the

system with plenty of clean water.

Recommendation: Use the special SOLO cleaner

for plant protection sprayers (dosing bottle of

500 ml [approx. 16.9 oz], part no.: 49 00 600).

Never use aggressive, acid- or solvent-containing

cleaning agents (gasoline for example).

4 Using the pressure sprayer

Ensure that you follow all of the safety

instructions when using the pressure sprayer.

Every time you use the pressure sprayer, first

check it all over to ensure it is safe to use

according to section 5.7.

4.1 Spraying

x When applying spraying agent, ensure by using

appropriate measures and procedures that the

unintended release of agent to other areas is

minimized and the drift to the surrounding areas

is prevented.

x Always proceed with the greatest care when

spraying.

x Never use the device under windy conditions or

if it is raining, as this would risk widespread

drifting of the spraying agent.

x Check the wind direction before starting work

and select the spraying direction downwind of

the user.

x It is best to perform spraying work in the morning

or evening, as it tends to be less windy then.

x Ensure that you only wet what is in fact intended

to be covered with spraying agents.

x Never spray the agent towards persons,

animals, open windows or doors, cars or

anything else that could be damaged by the

spraying agent.

x When spraying, ensure that the spraying agent

is applied evenly and homogeneously to the

treated area.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo 453 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info