655568

Solo 456 Seite 20

20
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
1 Safety regulations
ENGLISH 6
1.5 Work clothing /
personal protection equipment (PPE)
Always wear suitable protective clothing in
accordance with the relevant regulations. The
clothing must protect all parts of your body against
contact with spraying agents and against objects
that are kicked up – i.e., protective gloves, face
protection (e.g., protective goggles), protective
footwear, body protection (e.g., rubber apron), if
required breathing protection.
x Clothing should be appropriate – i.e., tight-fitting,
but not obstructive.
x Wear protective shoes with good grip, preferably
safety shoes.
x Wear protective gloves with non-slip
palms.
x Wear face protection (e.g., safety goggles)
against the spraying agents.
x Always wear a breathing mask when
working in dense and tall plants, in
greenhouses, in dips in the ground or in
trenches and when using dangerous
spraying agents.
x Immediately change any clothing that becomes
soaked with the spraying agent.
x Wash the work clothing regularly.
x Never wear a scarf, tie, loose jewellery or other
items of clothing that could be caught in a bush
or on a branch.
1.6 Before and during work
x Every time before you start using the device,
check the entire device to ensure it is safe to use
according to section 5.8.
x Check the spraying agent tank and all hoses and
pipes that carry the spraying agent for leaks.
x Prior to every use, ensure the proper functioning
for the pressure relief valve (4).
x Never start working if there are any irregularities
or leaks, if you can see any damage to the
equipment or if the equipment is not working
properly in any way. In this event, immediately
depressurise the device by pulling on the
pressure relief valve (Fig. 3) and have it checked
by a specialist workshop.
Before pulling on the pressure relief valve (4),
the device must always be in an upright position.
Attention: Keep the device away from your face!
x The device must only be operated by one
person at a time. Nobody else must be
within a radius of 15 metres [approx.
16 yards] at the same time.
x When starting to pump, ensure that the shut-off
valve is closed. Point the spray tube towards a
free area.
x Always ensure that there is an adequate air
change when working in restricted conditions, in
tight, tall plant growth, in greenhouses, in dips in
the ground or in trenches.
x Always remain within calling distance of other
persons who could help in the event of an
emergency.
x Take breaks at regular intervals.
x Never eat or drink when using spraying agents.
x Never smoke in areas where you are
working.
x When removing the spray tube, do not point to
yourself or other persons with the end of the
tube.
1.7 Maintenance, repairs and storage
Only perform maintenance work and repairs by
yourself if they are covered in these operating
instructions. All other work must be carried out by
an authorised workshop.
The repair of modern devices and their safety-
relevant assemblies, requires qualified, specialized
training and a workshop equipped with special
tools and test devices. The specialist has the
required training, experience, and equipment at his
disposal to provide you with the most cost-effective
solution and can help you in many ways with
advice and service.
x The device must not be serviced, repaired
or kept in the vicinity of naked flames.
x Before doing any maintenance work or repairs
and before opening the spraying agent tank,
depressurise the device by pulling on the
pressure relief valve (Fig. 3).
Before pulling on the pressure relief valve (4),
the device must always be in an upright position.
Attention: Keep the device away from your face!
x Always depressurise the device by pulling on the
pressure relief valve (4) before unscrewing the
high-pressure hose, the shut-off valve (5), the
pressure gauge (depending on the model), the
spray tube (6) and the nozzle attachment (7).
x All repairs must only be performed using SOLO
genuine replacement parts.
x The device must not be altered in any way, as
this could adversely affect the safety of the
device and potentially cause an accident or
injury.
… 20 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

solo-456

Suche zurücksetzen

  • hallo bei der solo 456 lässt sich kein Druck aufbauen warum nicht Grüße Eingereicht am 23-8-2018 11:37

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Solo 456 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info