Bedienungsanleitung Solo 473P (Seite 24 von 96) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

655636

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

2 Safety regulations

ENGLISH 6

2.5 Transportation of the device

x To prevent damage and to eliminate potential

hazards for other road users, use secure lashing

equipment to secure the device and prevent it

from tipping over and falling when transporting it

on a vehicle.

x Take appropriate measures to ensure that the

spraying agent cannot leak or spill. Check the

spraying agent tank and all hoses and pipes that

carry the spraying agent for leaks.

Before transporting the device you should ideally

prepare the device for transportation according

to section 6.6.

2.6 Before and during work

x Every time before you start using the device,

check the entire device to ensure it is safe to use

according to section 6.8.

x Check the spraying agent tank and all hoses and

pipes that carry the spraying agent for leaks.

x Never start working if there are any irregularities

or leaks, if you can see any damage to the

equipment or if the equipment is not working

properly in any way.

In this event, immediately have the device

checked by a specialist workshop.

x The device must only be operated by one

person at a time. Nobody else must be

within a radius of 15 metres [approx.

16 yards] at the same time.

x When starting to pump, ensure that the shut-off

valve is closed. Point the spray tube towards a

free area.

x Always ensure that there is an adequate air

change when working in restricted conditions, in

tight, tall plant growth, in greenhouses, in dips in

the ground or in trenches.

x Always remain within calling distance of other

persons who could help in the event of an

emergency.

x Take breaks at regular intervals.

x Never eat or drink when using spraying agents.

x Never smoke in areas where you are

working.

x When removing the spray tube, do not point to

yourself or other persons with the end of the

tube.

2.7 Maintenance and repairs

Only perform maintenance work and repairs by

yourself if they are covered in these operating

instructions. All other work must be carried out by

an authorised workshop.

The repair of modern devices and their safety-

relevant assemblies, requires qualified, specialized

training and a workshop equipped with special

tools and test devices. The specialist has the

required training, experience, and equipment at his

disposal to provide you with the most cost-effective

solution and can help you in many ways with

advice and service.

x The device must not be serviced, repaired

or kept in the vicinity of naked flames.

x Always depressurise the device before doing

any maintenance work or repairs.

To depressurise the device, hold the spray tube

in the spraying agent tank or in a suitable

container for the spraying agent and operate the

shut-off valve until no more fluid is sprayed.

x Always depressurise the device before

unscrewing the high-pressure hose, the shut-off

valve, the pressure gauge (depending on the

model), the spray tube and the nozzle

attachment.

x All repairs must only be performed using

genuine SOLO replacement parts.

x The device must not be altered in any way, as

this could adversely affect the safety of the

device and potentially cause an accident or

injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo 473P Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info