Bedienungsanleitung Solo 475 Comfort (Seite 22 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

655639

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

2 Safety regulations

ENGLISH 4

x Never use the device if any part of it is unsafe or

if it is not in an overall condition that makes it

safe to use. Before using the device always

check whether it is safe to use according to

section 6.1.

x Immediately replace damaged parts. Only use

genuine SOLO replacement parts.

x Only use accessories and add-on parts that

have been supplied and specifically approved for

installation on the device by us.

x The quality of any spare parts used is also an

important factor in ensuring that your device is

reliable and safe to use. Always use genuine

SOLO replacement parts, as these are the only

parts that have been manufactured with the

same equipment and under the same conditions

as the parts originally fitted to the device. This

ensures the highest possible level of quality and

accuracy of fit – vital factors in ensuring the

safety, reliability and proper functioning of your

device. Genuine SOLO replacement parts and

accessories are available from your authorised

SOLO dealer.

x He also has access to the necessary spare parts

lists, from which the required part numbers can

be taken, and he will also be kept up to date

about any minor improvements and changes to

the range of parts on offer. Please note that the

use of non-genuine replacement parts will

invalidate your warranty.

x When the device is not being used it should be

safely stored in a place where it will not

endanger the health and safety of others.

Prepare the device for storage according to

section 6.7. Ensure that the device is stored in a

safe place where unauthorised persons cannot

access it.

2.3 Safe handling of spraying agents

x Avoid contaminating the environment, the mains

water supply and/or public sewer systems with

spraying agent or cleaner!

Ensure to avoid contamination when mixing,

filling, using, draining, cleaning, servicing and

transporting by using adequate procedures and

suitable containers.

x Spraying agents and cleaners must never be

allowed to enter the mains water supply – not

even by back-suction when filling, public sewer

systems, sprayed onto wastelands, allowed to

drain into natural bodies of water or disposed of

together with normal domestic waste. This also

means that appropriate care must be taken

during filling to ensure that none of the spraying

agent is drawn back into water pipes. Spraying

agents and cleaners and any unused leftovers of

spraying agents and cleaners must always be

collected in a suitable container and disposed of

via approved facilities for household chemical

waste. Please contact your local authorities for

information about your nearest disposal facilities.

x Avoid any direct contact with spraying agents.

In case of contact with health hazardous spray-

ing agents, immediately rinse the affected body

parts with plenty of clean water, immediately

change the clothing soaked with spraying agents

and immediately seek medical advice.

x Never eat or drink when handling spraying

agents.

x Stop working immediately if you start to feel

unwell while working, or if you become unusually

tired. Seek medical advice if the condition

persists.

x Never allow children or anybody who is not

familiar with handling this type of spraying agent

to handle the spraying agent.

x Clean the spraying agent tank and all other

spraying agent carrying parts whenever the

spraying agent is changed. To flush out any

residue from the pump and the hose, run the

backpack sprayer with clean water after cleaning

the spraying agent tank and before the next

spraying agent is filled in. This will prevent the

risk of any chemical reactions taking place

between the different substances.

x Never spray in narrow or enclosed spaces –

spraying agents are toxic and there is a risk of

poisoning. Spraying equipment must for

example only be used in greenhouses if

adequate ventilation is provided. Signs must be

put up in greenhouses that have been treated.

Nobody should enter the greenhouse again until

it has been thoroughly ventilated.

x When you have finished spraying, prepare the

device for storage according to section 6.7,

thoroughly wash your face and hands with soap,

take off your work clothing and ensure that it is

washed regularly.

Any unused spraying agent that is left over in the

device could cause corrosion and hence

damage the device. Special attention must be

paid to wearing parts like spray nozzles, filters

and seals.

2.4 Transportation of the device

x To prevent damage and to eliminate potential

hazards for other road users, use secure lashing

equipment to secure the device and prevent it

from tipping over and falling when transporting it

on a vehicle.

x Take appropriate measures to ensure that the

spraying agent cannot leak or spill. Check the

spraying agent tank and all hoses and pipes that

carry the spraying agent for leaks.

Before transporting the device you should ideally

prepare the device for transportation according

to section 6.7.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo 475 Comfort Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info