658836
32
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
Operating and maintenance information - Maintenance and care of the cutting gear
ENGLISH 32
E
N
G
8. Operating and maintenance information
With modern equipment and safety-relevant components, maintenance and repairs must only be
carried out by persons with suitable specialist qualifications in a workshop equipped with the
necessary special tool and testing equipment. As a result, the manufacturer recommends that all work
which is not described in these operating instructions should be performed by a specialist workshop.
The experts have access to the training, experience and equipment which is required in order to
provide you with the most cost-effective solution. An expert can also offer invaluable advice.
Always follow all of the safety instructions when performing maintenance work!
After the device has been run in for around 5 operating hours, all accessible nuts,
bolts and screws (except the carburettor adjusting screws) should be checked for
tightness and retightened as required.
It is best to store the device in a dry and safe location with a full fuel tank. There must not be any
naked flames or similar nearby. If you plan to not use the chainsaw for a longer period (i.e. more than
four weeks), please refer to the information in chapter 8.10 "
Shutdown and storage”.
8.1 Maintenance and care of the cutting gear
Generall information saw chain
Every saw chain is matched to the relevant chainsaw type in terms of its form, cutting performance
and design. Only use the genuine SOLO saw chain which is approved for your chainsaw / guide bar
type.
The key distinguishing factors for the saw chain are:
The form of the cutting elements:
a) Solid bit (rectangular cutting tooth, professional chainsaws)
b) Half bit (half-round cutting tooth, semi-professional / hobby chainsaws)
The pitch:
This is the distance s (from one rivet to the next but one) divided by 2.
The pitch is quoted in inches.
The driving link thickness:
This is the thickness of the part of the driving link which protrudes in the
guide groove of the rail
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Solo 644 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info