658839
23
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
Preparing the equipment for use - Refuelling and adding oil to the chain lubrication system
ENGLISH 23
E
N
G
Chain lubrication
Chainsaw oil with an anti-fling additive that helps the oil adhere to the chain should be used
for lubrication of the saw chain and guide bar.
You should generally always add the chain oil whenever topping up with fuel.
If the saw is used regularly we recommend the use of biodegradable chainsaw oil.
The bio-chainsaw oil available from SOLO (order no. 00 83 107, 1 litre) has been awarded
the German blue angel symbol for eco friendliness (RAL UZ 48).
Biodegradable chainsaw oil only has a limited lifespan and should be used within a period of 2
years from the printed date of manufacture.
Important: If you are planning to not use the saw for more than 2 months and are using bio-
chainsaw oil then you will need to drain the oil tank and then add a small quantity of engine oil
(SAE 30). Then run the chainsaw for a while to ensure that all bio-oil residue has been flushed
out from the tank, oil pickup hose and cutting device. Fill up with bio-chainsaw oil again when you are
ready to take the saw back into operation again.
To check the chain lubrication, hold the guide bar
above a lightly coloured object (e.g. a tree stump)
and allow the chainsaw to run in part throttle mode.
A light oil trail should form on the lightly coloured
object.
Note: On new saw chains, if the oil tank was
completely empty or on delivery of the chainsaw it
may take up to a minute until a trace of oil becomes
visible. Do not start cutting until you are sure that
the chain is being properly lubricated!
(schematic diagram)
Important: Never work without chain lubrication. Check the operation of the chain lubrication
system and the level of the oil in the oil tank every time before you start work. Never re-use old
oil.
Refer to Chapter 3.6, "Chain lubrication adjustment screw", for notes on adjusting the amount
of oil delivered by the system.
Note for new saw chains:
Before installing a new saw chain we recommend soaking it in a container (bowl) with chain oil with
anti-fling properties for a certain amount of time (preferably overnight).
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Solo 651SP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info