Bedienungsanleitung Solo Port 423 (Seite 22 von 97) (Holländisch, Italienisch)

655794

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Safety regulations

ENGLISH 6

4.5 Irregularities, incidents, accidents

 In case of irregularities, leaks, visible damage or reduced efficiency, do not commence work, but leave

the unit from a dealer check.

 When irregularity, leaks or malfunctions occur during operation, turn off the stop switch immediately

and put the machine on the ground immediately. The device may only be used again if it is checked by

a specialist workshop and the cause of the fault has been eradicated.

 In case of serious disturbances or accidents during operation of the unit as smoke, strong odors from

the device or the device is in flames instantly remove the unit from your body and take a safe distance.

In case of fire, you have to call the fire department immediately.



4.6 Safe handling of spraying agents

 Avoid contaminating the environment, the mains water supply and/or public sewer systems with

spraying agent or cleaner!

Ensure to avoid contamination when mixing, filling, using, draining, cleaning, servicing and transporting

by using adequate procedures and suitable containers.

 Spraying agents and cleaners must never be allowed to enter the mains water supply – not even by

back-suction when filling, public sewer systems, sprayed onto wastelands, allowed to drain into natural

bodies of water or disposed of together with normal domestic waste. This also means that appropriate

care must be taken during filling to ensure that none of the spraying agent is drawn back into water

pipes. Spraying agents and cleaners and any unused leftovers of spraying agents and cleaners must

always be collected in a suitable container and disposed of via approved facilities for household

chemical waste. Please contact your local authorities for information about your nearest disposal

facilities.

 Avoid any direct contact with spraying agents. In case of contact with harmful pesticides rinse the

affected body parts immediately with plenty of water, any clothing soaked with spraying agents should

be changed immediately, seek medical advice if needed.

 Stop working immediately if you start to feel unwell while working, or if you become unusually tired.

Seek medical advice if the condition persists.

 Never allow children or anybody who is not familiar with handling this type of spraying agent to handle

the spraying agent.

 Clean the spraying agent tank and all other spraying agent carrying parts whenever the spraying agent

is changed. To flush out any residue from the agent tank and the hose, run the device with clean water

after cleaning the spraying agent tank and before the next spraying agent is filled in. This will prevent

the risk of any chemical reactions taking place between the different substances.

 Never use the device in narrow or enclosed spaces – spraying agents are toxic and there is a risk of

poisoning. Spraying equipment must for example only be used in greenhouses if adequate ventilation

is provided. Signs must be put up in greenhouses that have been treated. Nobody should enter the

greenhouse again until it has been thoroughly ventilated.

 When you have finished working, prepare the device for storage according to section 12, thoroughly

wash your face and hands with soap, take off your work clothing and ensure that it is washed regularly.

Any unused spraying agent that is left over in the device could cause corrosion and hence damage the

device. Special attention must be paid to wearing parts like hoses, filters and seals.

4.7 Protection of Environment

Be aware of your surroundings!

 Watch out for persons and animals which may be within your work area

 Be aware that noise is harmful to the environment. Inquire about and respect possible local rest

periods.

 Avoid contaminating the environment, the mains water supply and/or public sewer systems with

spraying agent, cleaner, fuel and oil! Ensure to avoid contamination when mixing, filling, using,

draining, mixing and filling-in the fuel mixture, cleaning, servicing and transporting by using adequate

procedures and suitable containers.

 When applying spraying agent, ensure by using appropriate measures and procedures that the

unintended release of agent to other areas is minimized and the drift to the surrounding areas is

prevented.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo Port 423 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Solo Port 423

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info