Bedienungsanleitung Solo Port 423 (Seite 27 von 97) (Holländisch, Italienisch)

655794

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Filling

ENGLISH 11

10. Filling

When handling the spraying agents, always follow

the safety instructions of these operating

instructions (pay special attention to section 4.6)

and the information provided by the manufacturer

of the particular spraying agent.

Spraying agent volume:

Mix the spraying agents according to the

instructions provided by the manufacturer of the

spraying agent. Choose the appropriate volume

according to requirements.

Mixing spraying agents:

Only mix spraying agents out in the open. Never

do this inside living spaces, stables or in storage

spaces that are used for food or animal feed.

Never mix the spraying agent directly in the

spraying agent tank.

Spraying agents in powder form:

 Mix the spraying agent in a separate container,

not in the spraying agent tank.

 Ensure that the mixture is thoroughly mixed

before pouring it into the spraying agent tank.

Liquid spraying agents:

 Fill 1/4 of the spraying agent tank with clean

water.

 Then pre-mix the spraying agent with clean

water in a separate container according to the

instructions provided by the manufacturer of the

spraying agent.

 Pour the pre-mixed spraying agent into the

spraying agent tank.

 Top up with the required amount of clean water

according to the manufacturer's instructions.

When using spraying agents that have been mixed

from herbal preparations, the liquid needs to be

pre-filtered.

 For filling the equipment, always use the

strainer inside the filler neck and observe the

filler area through the filling process.

 Prevent any direct contact between the external

filling hose and the tank contents.

 The spray medium must not be allowed to enter

the water mains through backlash.

 When filling with spray medium, ensure that

neither environment, nature nor the water

mains ever make contact with the spray

medium.

 Prevent the tank from overflowing, the

contamination of public water, foul water and

drainage channels.

Immediately wipe up any spilled spraying agent.

 The strainer has a mesh size of 0.55 mm. Only

use original SOLO strainers, part no.: 42 00 153

with standard mesh size.

Identification of the tank

contents:

Attach the relevant

sticker to the spraying

agent tank to indicate the

contents of the tank (i.e.,

herbicide, fungicide or

insecticide).

The designation of the

spraying agent used has

to be attached to the

device and has to be

updated every time when

the spraying agent is

changed.

CAUTION:

Never fill different spraying agents into the

spraying agent tank without first thoroughly

cleaning the tank and all parts that come into

contact with the spraying agent and flushing the

system with plenty of clean water.

Recommendation: Use the special SOLO cleaner

for plant protection sprayers (dosing bottle of

500 ml [approx. 16.9 oz], part no.: 49 00 600).

Never use aggressive, acid- or solvent-containing

cleaning agents (gasoline for example).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solo Port 423 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Solo Port 423

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info