Bedienungsanleitung Sommer Duo 500SL (Seite 8 von 36) (Englisch)

680841

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Safety instructions

• Installation, connection and initial operation of the drive mechanism may

only be carried out by qualified specialists.

• Do not operate the door when people, animals or objects are in its area

of movement.

• Keep children, disabled persons and animals away from the door.

• Safety goggles should be worn when drilling the mounting holes.

• Cover the drive mechanism up when drilling to ensure it does not get

soiled.

The walls and ceiling must be firm and stable. Only fit the drive

mechanism to a correctly aligned door. A door that has not been

aligned correctly can cause serious injuries.

• Doors must be stable because they are subjected to high traction and

pressure forces. Light doors made of plastic or aluminium must be

strengthened before installation if necessary. Ask your specialist retailer

for advice.

• Remove door locking system or disable same.

• Only use approved fixing materials (e.g. screws, plugs) that are appropri-

ate for the given material the ceilings and walls are made of.

• Check that the door runs easily.

• The door must be balanced.

Test : Manually open the door half-way. It must stay still in this position.

If the door moves downwards or upwards, mechanically readjust

it. Ask your specialist retailer for advice.

• Check the distance between the highest door position (HDP, see fig. 7 for

sprint/marathon and fig. 11 for duo) and the ceiling. The distance

between HDP and the lower edge of the C-rail must be between mini-

mum 5 mm and maximum 65 mm, whereby the push rod must be at an

angle of max. 30° (see fig. 17)! If the clearance is less than is permissi-

ble, the drive mechanism has to be moved back and an extended drive

rail fitted. Ask your local stockist for advice.

Door types and special accessories*

* Accessories are not included in the delivery.

Door type Accessories

Up-and-over door No special accessories required

Sectional door with Sectional door

single runner rail fitting with boomerang*

Sectional door with Sectional door

double runner rail fitting without boomerang*

Shutter-type door No accessories required

Canopy and non-protruding door Tilting arm*

Swing door Swing-door fitting*

Side-opening sectional door Please consult specialist retailer

123

Installation tips

• Check that all the parts have been supplied before you start installation

work in order to save time and unnecessary work if a part is missing.

• Installation work can be carried out quickly and reliably by two persons.

• The drive mechanism can be installed to one side of the door if it cannot

be installed at the centre. It is important to note that the door does not

bend as a result and jam in the guide rails.

Check : Open and close the door several times by hand

holding it at the point where you intend fitting the drive

mechanism. If the door can be moved in this way

without difficulty (in compliance with the above forces),

then the drive mechanism can be fitted at this point.

• Emergency Release

If the garage has no separate entrance (e.g. wicket-door), the user must

be able to operate the emergency release mechanism from the outside.

This is why the emergency release should be run to the outside where it

can be activated via a Bowden wire or a release lock. See 'Accessories'

section.

• Canopy and non-protruding doors

As the mechanical lock of a door with a drive mechanism has to be

dismantled or deactivated, it is possible to open the door manually up to

approx. 50mm depending on the door construction.

In order that, when opening the doors, the spring latches are unlocked

first before the drive opens the door. These spring latches are

connected to the drive via a locking set in order to first unlock the spring

latches before a drive opens the door when opening the door.

• Swing door / Side-opening sectional door

In the case of drives that push open a door of the above-mentioned type

(see fig.), the connections made in the direct socket unit have to be

swapped around as follows:

- wires 12 + 13 (marathon)

- wires 3 + 4 (sprint and duo).

Other pulse generators include: Funkcodys, radio-operated

interior switches and key-operated switches. In the case of the

Funkcody and radio-operated interior switch, no cable need be

run to the drive. Contact your local dealer for advice.

Adjustment of the top roller in a sectional door

General Installation Information

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sommer Duo 500SL Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sommer Duo 500SL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info