Bedienungsanleitung Sommer Marathon 550SL (Seite 19 von 32) (Englisch)

474214

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operation/Use

Programming the hand-held remote control

1. Press the Learn button (1).

▫ 1x for channel 1; the LED (3.1) lights up

▫ 2x for channel 2; the LED (3.2) lights up

 If no code is sent within 10 seconds, the radio receiver switches

to Normal mode.

2. Press the desired hand-held transmitter button (5) until the LED (3.1/3.2)

extinguishes, depending upon which channel has been selected.

 LED extinguishes – programming is ﬁ nished.

 The hand-held transmitter has transferred the radio code to the

radio transmitter.

3. For the additional programming of hand-held transmitters, repeat

the steps above. A maximum of 112 memory locations are available

for each radio receiver.

Interrupting the Learn mode:

Press the Learn button (1) until no more LEDs are lit.

Deleting a hand-held remote control button

from the radio receiver

If a user moves to a group garage unit and wishes to use the hand-held

transmitter with it, all radio codes in the transmitter must be deleted from

the radio receiver.

For safety reasons every button and all button combinations must be

deleted from the hand-held transmitter.

1. Press the Learn button (1) and keep it pressed for ﬁ ve seconds.

 An LED blinks (which one is irrelevant).

2. Release the Learn button (1).

 The radio receiver is in Deletion mode.

3. Press the hand-held transmitter button whose code should be deleted

in the radio receiver.

 The LED extinguishes. The deletion procedure is ended.

4. Repeat the procedure for all buttons and button shortcuts.

Deleting a channel from the radio receiver

1. Press and hold the Learn button (1).

▫ 1x for channel 1; the LED (3.1) lights up

▫ 2x for channel 2; the LED (3.2) lights up

 After 5 seconds, the LED ﬂ ashes (3.1 or 3.2).

 After another 10 seconds, the LED lights up steadily (3.1 or 3.2).

2. Release the Learn button (1).

 The deletion procedure is ended.

Deleting the radio receiver memory

If a hand-held transmitter is lost, all channels in the radio receiver must be

deleted for security reasons. Afterward, the radio receivers of all hand-held

remote control must be reprogrammed.

1. Press and hold the Learn button (1).

 After 5 seconds, the LED ﬂ ashes (3.1 or 3.2).

 After another 10 seconds, the LED lights up steadily (3.1 or 3.2).

 After a total of 25 seconds, all LEDs light up steadily (3.1 and 3.2).

2. Release the Learn button (1) – the deletion procedure is ended.

Connecting external antenna

If reception is inadequate with the radio receiver internal antenna,

an external antenna can be connected; see chapter “Functions and

connections – connecting an external antenna”.

The antenna cable may not exert any mechanical force on the radio

receiver; provide for stress relief.

What is button 2 for?

Button 2 is deﬁ ned for opening and closing the door by means of two

different buttons or channels (2-channel operation).

This way the door can be opened with one button and closed with the other.

If this function is utilized, 2 buttons can be connected. For details on

settings, see chapter “Functions and connections – connecting button 2”

and chapter “Functions and connections – deﬁ ned opening and closing

(DIP 7)” as well as “Partial opening (DIP 8)”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sommer Marathon 550SL Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sommer Marathon 550SL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info