Commissioning
17
“Teaching” remote control transmitters
• Push the “Learn” button (1)
– 1x for channel 1 (inside), LED (3.1) lights up
– 2x for channel 2 (outside), LED (3.2) lights up
– If a radio code is not transmitted within 10 seconds, then the receiver
switches back to normal operating mode.
– Abort “Learning” mode: Press “Learn” button (1) until all LEDs go
out.
• Depress the desired remote control transmitter button (5) until the
LED goes out – depending on which channel has been selected.
Remote control transmitter has transferred the radio code to the radio
receiver.
• LED goes out – “Learning” process is complete.
“Teaching” additional remote control transmitters. Repeat the above steps.
A maximum of 448 memory slots are available per radio receiver.
Attaching instruction sign
• Attach the instruction label for the operation of the emergency
release to the emergency release rope.
Attaching warning sign
• Attach the warning signs (text + triangle sign) at a position where
they are clearly visible, e.g. beside the push button (warning triangle)
and on the door leaf (text + warning triangle).
