Bedienungsanleitung Sommer S 9060 base (Seite 60 von 80) (Englisch)

680551

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

46900V001_Rev-D_EN

13. Function test/Final test

INFORMATION

After installation of the operator, the

person responsible for the installation

of the operator must complete an EC

Declaration of Conformity for the door

system in accordance with Machinery

Directive 2006/42/EC and apply the CE

mark and a type plate. This documentation

and this installation and operating manual

for the operator must be handed over to

the user.

This also applies if the operator is

retrotted to a manually operated door.

INFORMATION

Reversing: The operator stops when it

meets an obstruction and then moves in

the opposite direction for a short distance

to free the obstruction.

In the automatic closing function the

door opens completely if an obstacle is

detected.

INFORMATION

The operating forces can be modied and

adjusted with SOMlink and a WiFi-enabled

device. For more information ask your

specialist dealer.

After successful testing of the force settings, the obstacle

detection and the functions, the qualified specialist must

issue the EC Declaration of Conformity and attach the

CE mark and type plate to the door system.

The operator must reverse in the door OPEN direction

when it is loaded with a weight of 20 kg. The weight is

fastened in the centre of the bottom edge of the door for

this purpose.

The door must reverse during the door CLOSE

movement if it hits a 50-mm-high obstacle on the ground.

1. Open the door with the operator.

2. Place a 50-mm-high object in the centre of the door.

50 mm

Fig. Example: Obstacle detection on sectional door

3. Close the door with the operator.

⇒ If the door hits an obstacle, the operator must

immediately reverse.

⇒ The door opens completely at a pulse from the

transmitter.

⇒ If the operator does not reverse, a position reset

is required, see Chapter "10.13 Resetting the

control unit". The positions and the forces must

be reprogrammed.

13.2 Handover of door system

The qualified specialist must instruct the user:

• on the operation of the operator and its dangers

• on the handling of the manual emergency release

• on the regular maintenance, testing and care

measures which the user can carry out, see Chapter

"15. Maintenance and care"

• on the troubleshooting measures which the user can

carry out, see Chapter "16. Troubleshooting"

The user must be informed about which work must only

be performed by a qualified specialist:

• installation of accessories

• settings

• regular maintenance, testing and care, with the

exception of that described in Chapter

"15. Maintenance and care"

• troubleshooting, except that described in Chapter

"16. Troubleshooting"

• repairs

The following documents for the door system must be

handed over to the user:

• the installation and operating manuals for the

operator and the door

• inspection book

• EC Declaration of Conformity

• handover protocol for the operator

http://som4.me/konform

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sommer S 9060 base Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sommer S 9060 base

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info