680825
41
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
41
S10564-00001_Rev-A_EN
8. Electrical connection and special functions
8.1 Connection to mains voltage
The direct connection of the wall control unit to a all-
pole line disconnecter, e.g. a main switch or a power
socket, must be secured. Local and national regulations
(e.g. VDE) must be observed.
The installation of the operator to the mains voltage must
be carried by trained electricians only.
People under the influence of drugs, alcohol, or
medications that can influence their ability to react may
not work on the operator.
Observe in particular the following safety instructions for
this chapter.
DANGER
Danger due to electric current!
Contact with live parts may result
in electric current owing through
the body. Electric shock, burns or death
will result.
All work on electrical components
may only be carried out by a trained
electrician.
Before commissioning, ensure that
the mains voltage of the power source
corresponds with the voltage listed on
the operator type plate.
Do not connect the mains voltage until
mounting is complete.
If a battery pack must be connected,
establish the connection to the battery
pack as the nal step.
Then check that the operator is
disconnected from the power supply.
NOTE
Do not connect the wall control unit to the
mains voltage until installation is complete
to prevent damage to the operator.
INFORMATION
All devices to be connected externally
must have a safe isolation of the contacts
from the mains voltage supply according to
EC 60364-4-41.
Wiring for external devices must be
installed in accordance with IEC 60364-4-41.
All electrical wiring, even the control
cable, must be rmly secured to prevent
displacement.
L`
N
LN
Fig. Mains connection
Connection to the mains voltage must not be established
until mounting is complete. The connection to the battery
pack is the last.
INFORMATION
In order to connect a power socket to a all-
pole line disconnecter, e.g. a main switch,
the wall control unit must be installed as
follows:
the supplied network cable is about
0.7 m long and must not be shortened or
extended.
easily visible and accessible
600 mm
Fig. Distance of wall control unit to power socket
Note that the distance between the wall control unit and
the power socket must not exceed 0.6 m.
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sommer S 9060 Tiga wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sommer S 9060 Tiga

Sommer S 9060 Tiga Bedienungsanleitung - Deutsch - 96 seiten

Sommer S 9060 Tiga Bedienungsanleitung - Holländisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info