680782
34
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
34
S10931-00001_Rev-D_EN
6. Installation
18. Move door to centre position.
The motor carriage moves with it.
19. Pull the emergency release cord.
The motor carriage is locked.
The door can only be moved by the operator.
20. Check to make sure that no part of the door projects
into public footpaths or roads.
WARNING
Danger due to projecting parts!
Door leaves or other parts must not
project into roads or public footpaths.
This also applies while the door is
moving.
This may cause serious injury or death
to persons or animals.
Keep public roads and footpaths clear
of projecting parts.
Installation of the operator is complete.
6.7 Installing the wall control unit
In particular, follow the basic safety instructions listed
below.
DANGER
Danger due to electric current!
Contact with live parts may result in
electric current owing through the
body. Electric shock, burns or death
will result.
All work on electrical components must
be carried out by a trained electrician.
Before inserting the mains power plug
forthersttime,ensurethatthevoltage
of the power source matches the
voltage listed on the operator type plate.
Do not connect the power supply until
installation is complete.
Disconnect the mains plug before
working on the operator.
If an accumulator is connected,
disconnect it from the control unit.
Check that the operator is not live.
Secure the operator against being
switched back on.
WARNING
Danger of crushing and shearing!
The door can be actuated via the wall
switch.
If the door moves and there are persons
or animals in the movement area,
crushing and shearing injuries may be
caused by the mechanism and safety
edges of the door.
The wall control unit with keypad must
be mounted within sight of the door.
The wall control unit must not be
installed in the direct vicinity of moving
parts.
The membrane keypad of the wall
control unit must be installed at a height
of at least 1.6 m.
NOTE
To prevent damage to the operator, do not
connect the wall control unit to the power
supply until installation is complete.
INFORMATION
The power cable is approx. 1.2 m long.
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sommer S 9080 pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sommer S 9080 pro

Sommer S 9080 pro Bedienungsanleitung - Deutsch - 88 seiten

Sommer S 9080 pro Bedienungsanleitung - Holländisch - 88 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info