680782
39
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
39
S10931-00001_Rev-D_EN
8. Electrical connection
8.1 Connection to a power outlet
A power outlet is required for the electrical connection of
the operator.
A power outlet must be installed by a trained electrician.
The power outlet must be protected by a fuse. Local
and national installation regulations (e.g. VDE) must be
observed.
Persons under the influence of drugs, alcohol, or
medications that can influence their ability to react may
not work on the operator.
Observe in particular the following safety instructions for
this chapter.
DANGER
Danger due to electric current!
Contact with live parts may result in
electric current owing through the
body. Electric shock, burns or death
will result.
All work on electrical components must
be carried out by a trained electrician.
Before inserting the mains power plug
forthersttime,ensurethatthevoltage
of the power source matches the
voltage listed on the operator type plate.
Do not connect the power supply until
installation is complete.
Disconnect the mains plug before
working on the operator.
If an accumulator is connected,
disconnect it from the control unit.
Check that the operator is not live.
Secure the operator against being
switched back on.
NOTE
To prevent damage to the operator, do not
connect the wall control unit to the power
supply until installation is complete.
1100 mm
Fig. Distance between wall control unit and power outlet
Note that the distance between the wall control unit and
the power outlet must not exceed 1.1 m.
INFORMATION
The power outlet must be installed as
follows:
within easy reach of the wall control unit
power cable
easily visible and clear of obstacles
INFORMATION
The power cable is approx. 1.2 m long.
INFORMATION
The power cord that has been provided
may not be shortened or extended.
All devices to be connected externally must
have safe isolation of the contacts from the
mains voltage supply in accordance with
IEC 60364-4-41.
Wiring for external devices must be installed
in accordance with IEC 60364-4-41.
All electrical wiring, including the control
cable, must be rmly secured to prevent
displacement.
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sommer S 9080 pro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sommer S 9080 pro

Sommer S 9080 pro Bedienungsanleitung - Deutsch - 88 seiten

Sommer S 9080 pro Bedienungsanleitung - Holländisch - 88 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info