Bedienungsanleitung Sommer S 9080 Tiga (Seite 9 von 96) (Englisch)

680826

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

S10564-00001_Rev-A_EN

1.9 Improper use of the operator

Any other use or additional use that has not been

described in Chapter 1.8 constitutes improper use.

The user bears the sole responsibility for any risk

involved.

The manufacturer's warranty will be voided by:

• damage caused by other use and improper use

• use with defective parts

• unauthorised modications to the operator

• modications and non-approved programming of the

operator and its components

The door must not be part of a fire and smoke protection

system, an evacuation path or an emergency exit that

automatically closes the door in the event of fire.

Installation of the operator will prevent automatic closing.

Observe the local building regulations.

The operator may not be used in:

• areas with explosion hazard

• very salty air

• aggressive atmosphere, including chlorine

1.10 Qualifications of personnel

People under the influence of drugs, alcohol, or

medications that can influence their ability to react may

not work on the operator.

After installation of the operator, the person responsible

for the installation of the operator must complete an

EC Declaration of Conformity for the door system in

accordance with Machinery Directive 2006/42/EC

and apply the CE mark and a type plate to the door

system. This also applies if the operator is retrofitted

to a manually operated door. All documents as well as

the inspection book for the door, the installation and

operating manual and the handover protocol must be

retained by the user.

The following is available for this purpose:

• handover protocol for the operator

• EC Declaration of Conformity

At:

http://som4.me/konform

Trained qualied specialist for installation,

commissioning and disassembly

This installation and operating manual must be read,

understood and complied with by a qualified specialist

who installs or performs maintenance on the operator.

Work on the electrical system and live parts may be

performed only by a trained electrician in accordance

with EN 50110-1.

The installation, commissioning and disassembly of the

operator may only be performed by a qualified specialist.

The qualified specialist must be familiar with the following

standards:

• EN 13241-1

Doors and gates - Product standard

• EN 12604

Doors and gates - Mechanical aspects -

Requirements

• EN 12605

Doors and gates - Mechanical aspects - Test

methods

• EN 12445 and EN 12453 -

Safety in use of power operated doors

A qualified specialist is a person ordered by the installer.

The qualified specialist must instruct the user:

• on the operation of the operator and its dangers

• on the handling of the emergency release

• on regular maintenance and care which the user

can execute

The user must be informed that other users must be

instructed on the operation of the operator, its dangers as

well as the emergency release.

The user must be informed about which work must only

be performed by a qualified specialist:

• installation

• settings

• regular maintenance

• repairs

1. About this installation and operating manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sommer S 9080 Tiga Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sommer S 9080 Tiga

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info