488954
38
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
Product Guide
A-2
2. Check the router
You can bypass your router’s switch to determine whether there are any router configuration issues by connecting a Sonos
product as shown below—in this BOOST configuration example, note that the BOOST and the computer still have Internet
access:
Be sure that your cable/DSL modem is connected to the router’s WAN (Internet) port.
Temporarily remove any other components that are wired to your network.
Connect an Ethernet cable from the computer directly to the back of the BOOST, and then connect another Ethernet
cable from that Sonos product directly to one of the LAN ports on your router.
When you make a change to your network configuration, you may need to power cycle the Sonos product by
unplugging the power cord, and then plugging it back in.
If you are not using a router, you can visit our Web site at http://faq.sonos.com/norouter for more information.
3. Check the wiring
Check the indicator lights on both the router and the Sonos product. The link/status lights should be lit solid, and the activity
lights on the router should be blinking.
If the link lights are not lit, try connecting to a different port on your router.
If the link lights still do not light, try connecting a different Ethernet cable.
Sonos player is not operating properly
If the status indicator is not lit and no sound is produced when the unit is plugged in, check to ensure the power cord
is properly seated.
If the status indicator is solid white, make sure the volume is set to a suitable level; make sure MUTE is not on; if
CONNECT:AMP, make sure external speakers are connected securely.
If the player has suddenly stopped playing music and the status indicator is flashing orange and white, pause or unplug
the player for a few minutes to allow it to cool. Check to make sure the vents are not blocked. See
"Player Status
Indicators" on page A-5.
Check the link/activity lights on both the router and the Sonos product that is wired to your router.The link lights should
be lit solid and the activity lights should be blinking.
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sonos Controller for iPhone wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sonos Controller for iPhone

Sonos Controller for iPhone Bedienungsanleitung - Deutsch - 49 seiten

Sonos Controller for iPhone Bedienungsanleitung - Holländisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info