700026
73
Zoom out
Zoom in
Vorherige Seite
1/125
Nächste Seite
SONOS USER GUIDE
Don’t block the front of Amp so you can reach the touch controls.
Connect the cables
Attach desired speakers
Your speakers’ power rating should be at least 125W for 8 ohm speakers, and at least 200W for 4 ohm
speakers. Do not connect speakers rated at less than 4 ohm.
Note: Amp can drive speakers with nominal impedance above 4 ohms. Two pairs of 8 ohm speakers wired in
parallel are also supported. Don’t wire your speakers in series because it will result in poor sound
quality.
1. Remove the cap from the banana plug to reveal the connection hole.
2. Insert the stripped end of the speaker wire into the hole, then return the cap to the banana plug to secure
the connection.
Note: Connect the red (+) and black (-) terminals from each speaker to the corresponding banana plug and
terminal on Amp. Mismatching of polarities will result in weak central sound and a distorted sense of
sound direction.
3. Insert the banana plug into the proper speaker terminal on the back of Amp.
4. Repeat to install the other speaker wires.
Connect the power cord
Attach the power cord and plug in Amp.
You’ll use our app to set up and control your Sonos system. If you don’t have the Sonos app, download it
from your app store. See Controls and lights
.
Connect Amp to your TV
Use an HDMI cable to connect Amp to your TV. When connected, Amp creates two front audio channels and
plays your TV sound through your favorite non-Sonos speakers.
Note: You may need the optical adapter too (the app lets you know).
1. Fully insert the HDMI cable into Amp’s HDMI port.
2. Connect the HDMI cable to your TV. You have two choices:
If your TV has an HDMI ARC port, connect the HDMI cable directly to the TV’s HDMI ARC port.
If your TV doesn’t have an HDMI ARC port, attach the optical adapter to the HDMI cable and connect
it to the TV’s optical digital OUT port.
If your TV has an HDMI ARC port
HDMI ARC is a special port that looks like a standard HDMI port. Although they look the same, if you connect
to a standard HDMI port, you won’t hear sound.
1. On your TV’s audio OUT panel, locate the HDMI ARC port.
73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sonos Home Sound System wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sonos Home Sound System

Sonos Home Sound System Bedienungsanleitung - Deutsch - 126 seiten

Sonos Home Sound System Bedienungsanleitung - Holländisch - 110 seiten

Sonos Home Sound System Bedienungsanleitung - Französisch - 128 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info