SONOS PLAY:5
11
• Be sure that your cable/DSL modem is connected to the router’s WAN (Internet) port.
• Temporarily remove any other components that are wired to your network.
• Connect an Ethernet cable from the computer directly to the back of the SONOS BRIDGE, and then connect another
Ethernet cable from the BRIDGE directly to one of the LAN ports on your router.
• When you make a change to your network configuration, you may need to power cycle the BRIDGE by unplugging the
power cord, and then plugging it back in.
• If you are not using a router, you can visit our Web site at http://faq.sonos.com/norouter for more information.
3.
Check the wiring
Check the link/activity lights on both the router and the Sonos component. The link lights should be lit solid and the activity
lights should be blinking.
• If the link lights are not lit, try connecting to a different port on your router.
• If the link lights still do not light, try connecting a different Ethernet cable.
Not all rooms are visible
You are probably experiencing wireless interference. Change the wireless channel your Sonos system is operating on by
following the steps below.
• Using a handheld Sonos controller: From the Settings menu, touch Advanced Settings, and then Wireless Channel.
Choose another wireless channel from the list.
• Using the Sonos Controller for Mac or PC: Select Preferences from the File (PC) or Sonos (Mac) menu. Click the
Advanced tab, and select another wireless channel.
It may take several seconds for the switch to take effect. If you have music playing, a short music dropout may occur during
the wireless channel change.
Important Safety Information
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components.
7.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
8.
Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
9.
Only use attachments/accessories specified by the manufacturer.
10.
Unplug this apparatus during lightning storms or when unused for long periods of time.
