Bedienungsanleitung Sony acid pro 6 (Seite 39 von 290) (Englisch)

257719

Zoom out

Zoom in

Vorherige Seite

1/290

Nächste Seite

GETTING STARTED | 35

Chapter

Getting Started

Now that you have an understanding of the interface and controls found in ACID® software, you are ready to begin

learning the techniques needed to pick, paint, and play in ACID projects. In this chapter you will learn the skills that will

allow you to create music, from locating media files to writing the finished project to CD.

Starting projects

Double-clicking the ACID icon on the desktop starts the software. You can immediately begin building your ACID project

using the application’s default project properties. However, you may prefer to customize the project properties prior to

beginning the project.

Setting project properties

ACID allows you to configure project properties and add summary information prior to beginning a project. Choosing

New from the File menu displays the New Project dialog. This dialog contains two tabs: Summary and Audio. Selecting

the Start all new projects with these settings check box configures the software to use the parameters and information

in both tabs as defaults when starting all subsequent projects.

Using the Summary tab

This tab allows you to enter information about the project. These boxes may be left blank or if information exists, you may

change it at any time.

Using the Audio tab

This tab allows you to set different characteristics the project uses to handle the audio.

Note:

You can edit project audio properties and summary information at any time. Choose Properties from the File

menu to display the Project Properties dialog, which contains the identical tabs and parameters as the New Project dialog.

Item Description

Title Enter the name or title of the project.

Artist Enter the name of the narrator, band, or artist(s) being recorded into the

project.

Engineer Enter the name(s) of the people who mixed and edited the project.

Comments Enter information that identifies and describes the project.

Universal Product Code/Media

Catalog Number

Enter the Universal Product Code (UPC) and the Media Catalog Number (MCN)

to be written to your CD for identification purposes.

Start all new projects with these

settings

Select this check box if your projects’ requirements do not change or you want

consistent settings for future projects.

Item Description

Master bus mode Choose either Stereo for a standard audio project or 5.1 Surround for a surround

project.

Number of additional stereo

busses

Enter the number of stereo busses that you want in your project. You may add up to 26

busses. The busses appear in the Mixer window.

For more information, see Using

busses on page 141.

Sample rate Choose a sample rate from the drop-down list or enter your own rate. The sample rate

range is 2,000

Hz to 192,000 Hz. Higher sample rates result in better quality sound, but

also mean larger audio files.

Bit depth Choose a bit depth from the drop-down list. A higher bit depth results in better quality

sound, but also means larger audio files.

Enable low-pass filter on LFE Select this check box to limit the audio sent to the LFE channel in a 5.1 surround

project.

For more information, see Working with 5.1 Surround on page 209.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony acid pro 6 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info