Bedienungsanleitung Sony BDP-S185 (Seite 21 von 28) (Englisch)

456950

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Additional Information

The disc does not play.

, The disc is dirty or skewed.

, The disc is upside down. Insert the disc with

the playback side facing down.

, The disc has a format that cannot be played

back by this player (page 23).

, The player cannot play a recorded disc that

is not correctly finalised.

, The region code on the BD or DVD does

not match the player.

The player does not detect a USB device

connected to the player.

, Make sure that the USB device is securely

connected to the USB jack.

, Check if the USB device or a cable is

damaged.

, Check if the USB device is on.

, If the USB device is connected via a USB

hub, connect the USB device directly to the

player.

The picture/sound is poor/certain

programmes display a loss of detail,

especially during fast-motion or dark

scenes.

, Picture/sound quality may be poor

depending on Internet content providers.

, Picture/sound quality may be improved by

changing the connection speed.

Recommended connection speed is of at

least 2.5 Mbps for standard definition video

(10 Mbps for high definition video).

, Not all videos will contain sound.

The picture is small.

, Press M to zoom in.

The player cannot connect to the network.

, Check the network connection (page 11)

and the network settings (page 18).

The message [A new software version is

available. Please go to the “Setup”

section of the menu and select “Network

update” to perform the update.] appears

on the screen when turning the player on.

, See [Network Update] (page 15) to update

the player to a newer software version.

The [Control for HDMI] function does not

work (BRAVIA Sync).

, Check that [Control for HDMI] is set to

[On] (page 18).

, If you change the HDMI connection, turn

the player off and on again.

, If power failure occurs, set [Control for

HDMI] to [Off], then set [Control for

HDMI] to [On] (page 18).

, Check the following and refer to the

instruction manual supplied with the

component.

– the connected component is compatible

with the [Control for HDMI] function.

– the connected component’s setting for

the [Control for HDMI] function is

correct.

, When you connect the player to a TV

through an AV amplifier (receiver),

– if the AV amplifier (receiver) is not

compatible with the [Control for HDMI]

function, you may be unable to control

the TV from the player.

– if you change the HDMI connection,

disconnect and reconnect the mains lead,

or a power failure occurs, try the

following:

1Switch the input selector of

the AV amplifier (receiver) so that the

picture from the player appears on the

TV screen.

2Set [Control for HDMI] to

[Off], then set [Control for HDMI] to

[On] (page 18). Refer to the instruction

manual supplied with the AV amplifier

(receiver).

Disc

USB device

Sony Entertainment Network

Network connection

Control for HDMI (BRAVIA Sync)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony BDP-S185 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony BDP-S185

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info