Bedienungsanleitung Sony BDP-S380 (Seite 20 von 27) (Englisch)

451363

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

F:\SD0001_A1\DATA\01GB-

BDPS380\GB_070ADD.fm

master page=left

specdef20090918

BDP-S380/S383

4-261-092-11(1)

Additional Information

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

There is no picture or the picture is not

output correctly.

, Check that all the connecting cables are

securely connected (page 9).

, Switch the input selector on your TV to

display the signal from the player.

, Reset the video output resolution to the

lowest resolution by pressing x on the

player for more than 10 seconds.

, For HDMI connections, try the following:

1Turn the player off and on again. 2Turn

the connected equipment off and on again.

3Disconnect and then reconnect the HDMI

cable.

, The HDMI OUT jack is connected to a DVI

device that does not support copyright

protection technology.

, For HDMI connections, check the [Output

Video Format] settings in the [Screen

Settings] setup (page 16).

, When the analogue signals are also output,

set [BD/DVD-ROM 1080/24p Output] to

[Off] in the [Screen Settings] setup

(page 16).

, For BD-ROMs, check the [BD/DVD-ROM

1080/24p Output] setting in the [Screen

Settings] setup (page 16).

The display language on the screen

switches automatically when connected to

the HDMI OUT jack.

, When [Control for HDMI] is set to [On]

(page 18), the display language on the

screen automatically switches according to

the language setting of the connected TV (if

you change the setting on your TV, etc.).

There is no sound or the sound is not

output correctly.

, Check that all the connecting cables are

securely connected (page 9).

, Switch the input selector on your AV

amplifier (receiver) so that the audio signals

of the player are output from your AV

amplifier (receiver).

, If the audio signal does not come through

the DIGITAL OUT (COAXIAL)/HDMI

OUT jack, check the audio settings

(page 16).

, For HDMI connections, try the following:

1Turn the player off and on again. 2Turn

the connected equipment off and on again.

3Disconnect and then reconnect the HDMI

cable.

, For HDMI connections, if the player is

connected to a TV through an AV amplifier

(receiver), try connecting the HDMI cable

directly to the TV. Refer also to the

instruction manual supplied with the AV

amplifier (receiver).

, The HDMI OUT jack is connected to a DVI

device (DVI jacks do not accept audio

signals).

, The device connected to the HDMI OUT

jack does not support the audio format of

the player. Check the audio settings

(page 16).

The HD Audio (Dolby Digital Plus, Dolby

TrueHD, DTS-HD High Resolution Audio,

and DTS-HD Master Audio) is not output

by bitstream.

, Set [BD Audio MIX Setting] to [Off] in the

[Audio Settings] setup (page 16).

, Check that the connected AV amplifier

(receiver) is compatible with each HD

Audio format.

The interactive audio is not output.

, Set [BD Audio MIX Setting] to [On] in the

[Audio Settings] setup (page 16).

Picture

Sound

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony BDP-S380 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony BDP-S380

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info