Bedienungsanleitung Sony BDP-S550 (Seite 58 von 75) (Englisch)

475876

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

The interactive audio is not output.

, Set “BD Audio Setting” to “Mix” in the

“Audio Settings” setup (page 48).

There is no picture or no sound when

connected to the HDMI OUT jack.

, Try the following: 1Turn the player off

and on again.

2Turn the connected

equipment off and on again.

3Disconnect

and then reconnect the HDMI cable.

There is no picture or picture noise

appears when connected to the HDMI OUT

jack.

, The HDMI OUT jack is connected to a DVI

device that does not support copyright

protection technology.

, If the HDMI OUT jack is used for video

output, changing the video output

resolution may solve the problem

(page 43).

No sound is output from the HDMI OUT

jack.

, The HDMI OUT jack is connected to a DVI

device (DVI jacks do not accept audio

signals).

The sound is not output correctly when

connected to the HDMI OUT jack.

, The device connected to the HDMI OUT

jack does not support the audio format of

the player. Check the audio settings

(page 45).

The display language on the screen

switches automatically when connected to

the HDMI OUT jack.

, When “Control for HDMI” is set to “On”

(page 52), the display language on the

screen automatically switches according to

the language setting of the connected TV (if

you change the setting on your TV, etc.).

The “Control for HDMI” function does not

work (BRAVIA Sync).

, Check that the mains lead of the connected

component is securely connected.

, If the HDMI indicator does not appear in

the front panel display, check the HDMI

connection (page 15, 20).

, Set “Control for HDMI” to “On” (page 52).

, Make sure that the connected component is

compatible with the “Control for HDMI”

function. For details, refer to the operating

instructions supplied with the component.

, Check the connected component’s setting

for the “Control for HDMI” function. For

details, refer to the operating instructions

supplied with the component.

, If you change the HDMI connection, turn

the player off and on again.

, If power failure occurs, set “Control for

HDMI” to “Off,” then set “Control for

HDMI” to “On” (page 52).

, For details on the “Control for HDMI”

function, see “About the BRAVIA Sync

features (for HDMI connections only)”

(page 16).

, If you connect the player to a TV through an

AV amplifier (receiver) that is not

compatible with the “Control for HDMI”

function, you may be unable to control the

TV from the player.

The external memory is not recognised.

, Try the following: 1Turn the player off.

2Align the V mark of the EXT slot with

the V mark on the external memory, and

insert the external memory (page 24).

3Turn the player on. 4Check that the

EXT indicator lights up in the front panel

display.

Bonus contents or other data that are

contained in a BD-ROM cannot be played.

, Try the following: 1Remove the disc.

2Turn the player off. 3Remove and re-

insert the external memory (page 24).

4Turn the player on. 5Check that the

EXT indicator lights up in the front panel

display.

6Insert the BD-ROM with

BonusView/BD-Live.

HDMI

External memory (local

storage)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony BDP-S550 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony BDP-S550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info