Bedienungsanleitung Sony bdp s560 (Seite 33 von 83) (Englisch)

139683

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

Hookups and Settings

9 Select “Start,” and press ENTER.

Press and hold the WPS button on the

wireless LAN router (access point)

until the light on the wireless LAN

router (access point) starts to blink.

Press the WPS button within 2 minutes

after step 9.

The message “Access point registration

is complete.” appears.

Example: when the wireless LAN router

(access point) has a WPS button

• When the player does not detect a wireless

LAN router (access point), repeat from step

9 after a while.

• In some cases, depending on the security of

the wireless LAN router (access point), it

may not be possible to use the Wi-Fi

Protected Setup function. In this case, follow

the on-screen instructions, and change the

settings of the wireless LAN router (access

point).

Select “Do not use,” and press

ENTER.

If your Internet service provider has a

specific proxy server setting, select

“Use.” For details, see “Network

Settings” on page 57.

Select “Perform” using M/m, and

press ENTER.

The network diagnostic starts.

Results are displayed after the player

finishes the network diagnostic.

If an error message appears, follow the

on-screen instructions.

For further details, visit the following

website and check the FAQ contents:

http://support.sony-europe.com/

Select “Finish,” and press ENTER.

Check the settings, and select

“Finish,” then press ENTER.

The message “Settings are complete.”

appears.

If an error message appears in the

network diagnostic results, check the

message. Then, set the network settings

again or perform the network diagnostic

again.

Use the following procedure when you

connect the player to a wireless LAN router

(access point) that is Wi-Fi Protected Setup-

compatible without security set or not Wi-Fi

Protected Setup-compatible.

1 Follow steps 1 and 2 of “Step 4:

Connecting to the Network” on page

26.

2 Check the SSID and the security key on

the setting screen of your wireless

LAN router (access point).

For information about how to use the

setting screen of the wireless LAN router

(access point), visit the following

website or consult the manufacturer of

the wireless LAN router (access point):

http://support.sony-europe.com/

– Security type: For details on the type of

security that can be used on this player,

see “About Wireless LAN Security” on

page 73.

– Security key: The wireless LAN router

(access point) has a WEP or WPA key

according to the selected security type.

WEP or WPA key may be displayed as

“passphrase” or “network key” depending on

the wireless LAN router (access point).

3 Press HOME.

4 Select (Setup) using </,.

5 Select “Internet Settings” in “Network

Settings,” and press ENTER.

6 Select “Start,” and press ENTER.

Setting wireless LAN (Access

point scan)

,continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony bdp s560 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony bdp s560

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info