Bedienungsanleitung Sony bdv e 870 (Seite 66 von 80) (Englisch)

371690

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

S-AIR

BRAVIA Internet Video

Network connection

Symptom Problems and solutions

There is no sound from the

S-AIR sub unit, noise is heard

from the S-AIR sub unit, or

sound from the S-AIR sub unit

skips.

• If you use another S-AIR main unit, place it more than 8 meters away from the

unit.

• Place the S-AIR main unit and S-AIR sub unit closer together.

• Avoid use of equipment that generates electromagnetic energy, such as a

microwave oven.

• Place the S-AIR main unit and S-AIR sub unit away from other wireless

products.

• See “If wireless transmission is unstable” (page 44).

• Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit.

• Turn off the system and S-AIR sub unit, then turn them on.

Symptom Problems and solutions

The picture/sound is poor/certain

programs display with a loss of

detail, especially during fast-

motion or dark scenes.

• Picture/sound quality may be poor depending on Internet content providers.

• Picture/sound quality may be improved by changing the connection speed.

Sony recommends a connection speed of at least 2.5 Mbps for standard-

definition video and 10 Mbps for high-definition video.

• Not all videos contain sound.

The picture is small. • Press X to zoom in.

Symptom Problems and solutions

The system cannot connect to the

network.

• Check the network connection (page 24) and the network settings (page 57).

You cannot connect your PC to

the Internet after [Wi-Fi

Protected Setup (WPS)] is

performed.

• The wireless settings of the router may change automatically if you use the Wi-

Fi Protected Setup function before adjusting the settings of the router. In this

case, change the wireless settings of your PC accordingly.

You cannot connect the system

to your wireless LAN router.

• Check if the wireless LAN router is on.

• Depending on the usage environment, including the wall material, radio wave

reception conditions, or obstacles between the system and the wireless LAN

router, the possible communication distance may be shortened. Move the

system and the wireless LAN router closer to each other.

• Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or

digital cordless device, may interrupt the communication. Move the unit away

from such devices, or turn off such devices.

The desired wireless router is not

detected even if [Scan] is

performed.

• Press RETURN to return to the previous screen, and try [Scan] again. If the

desired wireless router is still not detected, press RETURN to select [Manual

registration].

The message [A new software

version has been found on the

network. Perform update under

“Network Update.”] appears on

the screen when turning the

system on.

• See [Network Update] (page 52) to update the system to a newer software

version.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony bdv e 870 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony bdv e 870

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info