Bedienungsanleitung Sony BDV-E280 (Seite 48 von 68) (Englisch)

452486

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

[RGB]: Select this when connecting to a device

with an HDCP-compliant DVI jack.

x [HDMI Deep Colour Output]

[Auto]: Normally select this.

[16bit], [12bit], [10bit]: Outputs 16bit/12bit/

10bit video signals when the connected TV is

compatible with Deep Colour.

[Off]: Select this when the picture is unstable or

colors appear unnatural.

x [Pause Mode] (BD/DVD VIDEO/DVD-R/

DVD-RW only)

[Auto]: The picture, including subjects that

move dynamically, is output with no jitter.

Normally select this position.

[Frame]: The picture, including subjects that do

not move dynamically, is output in high

resolution.

[Audio Settings]

x [BD Audio MIX Setting]

[On]: Outputs the audio obtained by mixing the

interactive audio and secondary audio to the

primary audio.

[Off]: Outputs the primary audio only.

x [Audio DRC]

You can compress the dynamic range of the

sound track.

[Auto]

: Performs playback at the dynamic range

specified by the disc (BD-ROM only).

[On]: The system reproduces the sound track

with the kind of dynamic range that the

recording engineer intended.

[Off]: No compression of dynamic range.

x [Attenuate - AUDIO]

Distortion may occur when you listen to a

component connected to the AUDIO (AUDIO

IN L/R) jacks. You can prevent distortion by

reducing the input level on the unit.

[On]

: Attenuates the input level. The output

level is changed.

[Off]: Normal input level.

x [Audio Output]

You can select the output method where the

audio signal is output.

[Speaker]: Outputs multi-channel sound from

the system’s speakers only.

[Speaker + HDMI]

: Outputs multi-channel

sound from the system’s speakers and 2-channel

linear PCM signals from the HDMI (OUT) jack.

[HDMI]: Outputs sound from the HDMI (OUT)

jack only. Sound format depends on the

connected component.

• When [Control for HDMI] is set to [On] (page 50),

[Audio Output] is set to [Speaker + HDMI]

automatically and this setting cannot be changed.

• Audio signals are not output from the HDMI (OUT)

jack when [Audio Output] is set to [Speaker + HDMI]

and [HDMI1 Audio Input Mode] (page 50) is set to

[TV]. (European models only.)

• When [Audio Output] is set to [HDMI], the output

signal format for the “TV” function is 2-channel

linear PCM.

x [Sound Effect]

You can set the system’s sound effects (SOUND

MODE and [Surround Setting]

) to on/off.

[On]: Enables all of the system’s sound effects.

The upper limit of sampling frequency is set to

48 kHz.

[Off]: The sound effects are disabled. Select this

when you do not want to set the upper limit of

sampling frequency.

x [Surround Setting]

You can select the surround setting. For details,

see “Step 6: Enjoying Surround Sound”

(page 23)

x [Speaker Settings]

To obtain the best possible surround sound, set

the speakers. For details, see “Setting the

Speakers” (page 38).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony BDV-E280 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony BDV-E280

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info