Bedienungsanleitung Sony BDV-L600 (Seite 71 von 84) (Englisch)

474100

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Additional Information

Sound

Symptom Problems and solutions

There is no sound or wireless

transmission is not activated.

• The speaker cord is not connected securely.

• Check that the AC power cord (mains lead) of the subwoofer is connected

securely.

• Check that the volume of the main unit is other than “0.”

• Check the status of the LINK/STANDBY indicator on the subwoofer.

– Turns off.

– Check that the AC power cord (mains lead) of the subwoofer is connected

securely.

– Turn the subwoofer on by pressing "/1 on the subwoofer.

– Flashes green quickly.

– 1 Press "/1 on the subwoofer. 2 Insert the wireless transceiver into the

subwoofer correctly. 3 Press "/1 on the subwoofer.

–Flashes red.

–Press "/1 to turn off the subwoofer, and check the following items.

1Are the + and – speaker cords short-circuited?

2Is anything blocking the ventilation openings of the subwoofer?

After checking the above items and fixing any problems, turn on the

subwoofer. If the cause of the problem cannot be found even after

checking all the above items, consult your nearest Sony dealer.

– Flashes green or orange slowly or turns red.

– Make sure that the wireless transceiver is inserted correctly into the main

unit.

– Make the [Secure Link] setting again (page 55).

– Sound transmission is poor. Move the subwoofer so that the LINK/

STANDBY indicator turns green or orange.

– Move the system away from other wireless devices.

– Avoid using any other wireless devices.

– Turns green or orange.

– Check the speaker connections.

The Super Audio CD sound of a

component that is connected to

the HDMI IN 1 or HDMI IN 2

jack is not output.

• HDMI IN 1 and HDMI IN 2 does not accept an audio format that contains copy

protection.

There is no sound from the TV

via the HDMI OUT jack when

using the Audio Return Channel

function.

• Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]

(page 65). Also, set [Audio Return Channel] in [HDMI Settings] of [System

Settings] to [Auto] (page 65).

• Make sure that your TV is compatible with the Audio Return Channel function.

• Make sure that a High Speed HDMI cable is connected to a jack on your TV

that is compatible with the Audio Return Channel function.

The system does not output

sound correctly when connected

to a set-top box.

• Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]

(page 65).

Severe hum or noise is heard. • Move your TV away from the audio components.

• Clean the disc.

The sound loses stereo effect

when you play a CD.

• Select stereo sound by pressing (page 45).

The left and right sounds are

unbalanced or reversed.

• Check that the speakers and components are connected correctly and securely.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony BDV-L600 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony BDV-L600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info