Bedienungsanleitung Sony BDV-N5200W (Seite 26 von 84) (Englisch)

546415

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

BDV-N9200W/BDV-N9200WL/BDV-N7200W/BDV-N7200WL/BDV-N5200W

4-485-800-14(1)

D:\NORM'S JOB\SONY HA\SO140035\BDV-N9200_7200_5200 (PMRF

04)\4485800141_GB (CEK)\040GET.fm

masterpage: Left

Getting Started

Before performing the network

settings

When your wireless LAN router (access

point) is Wi-Fi Protected Setup (WPS)-

compatible, you can easily set the

network settings with the WPS button.

If not, check the following information in

advance, and record it in the space

provided below.

• The network name (SSID*) that

identifies your network.**

• If security is set on your wireless

network, the security key (WEP key,

WPA key).**

* SSID (Service Set Identifier) is a name

that identifies a particular wireless

network.

** You need to check the settings of your

wireless LAN router to get the

information about SSID and security key.

For details:

– visit the following website:

For customers in Europe and Russia:

http://support.sony-europe.com/

For customers in other countries/

regions:

http://www.sony-asia.com/section/

support

– refer to the operating instructions

supplied with the wireless LAN router

– consult the manufacturer of the

wireless LAN router

About wireless LAN security

Since communication via the wireless

LAN function is established by radio

waves, the wireless signal may be

susceptible to interception. To protect

wireless communication, this system

supports various security functions. Be

sure to correctly configure the security

settings in accordance with your

network environment.

x No Security

Although you can easily make settings,

anyone can intercept wireless

communication or intrude into your

wireless network, even without any

sophisticated tools. Keep in mind that

there is a risk of unauthorized access or

interception of data.

x WEP

WEP applies security to

communications to prevent outsiders

from intercepting communications or

intruding into your wireless network.

WEP is a legacy security technology that

enables older devices which do not

support TKIP/AES to be connected.

x WPA-PSK (TKIP), WPA2-PSK

(TKIP)

TKIP is a security technology developed

in response to the deficiencies of WEP.

TKIP assures a higher security level than

WEP.

x WPA-PSK (AES), WPA2-PSK (AES)

AES is a security technology that uses an

advanced security method distinct from

WEP and TKIP. AES assures a higher

security level than WEP or TKIP.

Step 4: Setting up the

Wireless System

The main unit transmits sound to the

surround amplifier that is connected to

the surround speakers. To activate

wireless transmission, perform the

following Steps.

1 Connect the AC power cord (mains

lead) of the main unit.

Before connecting the AC power

cord, make sure all connections in

“Step 2: Connecting the System”

(page 20) are secure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony BDV-N5200W Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony BDV-N5200W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info