Bedienungsanleitung Sony bravia kdl-32e4000 (Seite 26 von 36) (Englisch)

141911

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

On Timer Settings

“On Timer”: Sets the timer to turn on the TV from standby mode.

“Timer Mode”: Selects the desired period.

“Time”: Sets the time to turn on the TV.

“Duration”: Selects the time period after which the TV automatically switches

to standby mode again.

Clock Set

Allows you to adjust the clock manually. When the TV is receiving digital

channels, the clock cannot be adjusted manually since it is set to the time code of

the broadcasted signal.

Set-up

Auto Start-up

Starts the “first time operation menu” to select the language, country/region and

location, and tune in all available digital and analogue channels. Usually, you do

not need to do this operation because the language and country/region will have

been selected and channels already tuned when the TV was first installed

(page 6). However, this option allows you to repeat the process (e.g., to retune

the TV after moving house, or to search for new channels that have been

launched by broadcasters).

Language

Selects the language in which the menus are displayed.

Screen Settings

“Screen Format”: For details about the screen format, see “To change the

screen format manually to suit the broadcast” on page 14.

“Auto Format”: Automatically changes the screen format according to the

broadcast signal. To keep your setting, select “Off”.

“Display Area”: Adjusts the picture display area in 1080i/p and 720p sources

when "Screen Format" is set to "Wide".

• “Auto”: During digital broadcasts, displays pictures in accordance with the

settings recommended by the broadcast station.

• “Full Pixel”: Displays pictures in their original size.

• “Normal”: Displays pictures in their recommended size.

“Horizontal Shift”: Adjusts the horizontal position of the picture.

“Vertical Shift”: Adjusts the vertical position of the picture when “Screen

Format” is set to “Smart”, “Zoom” or “14:9”.

“Vertical Size”: Adjusts the vertical size of the picture when “Screen Format” is

set to “Smart”.

PC Settings

“Screen Format”: Selects a screen format for displaying input from your PC.

• “Full 1”: Enlarges the picture to fill the vertical display area, keeping its

original horizontal-to-vertical aspect ratio.

• “Full 2”: Enlarges the picture to fill the display area.

“Reset”: Resets the PC screen settings to the factory settings.

“Auto Adjustment”: Automatically adjusts the display position, phase and pitch

of the picture when the TV receives an input signal from the connected PC.

“Auto Adjustment” may not work well with certain input signals. In such cases,

manually adjust “Phase”, “Pitch” and “Horizontal Shift”.

“Phase”: Adjusts the phase when the screen flickers.

“Pitch”: Adjusts the pitch when the picture has unwanted vertical stripes.

“Horizontal Shift”: Adjusts the horizontal position of the picture.

“Power Management”: Switches the TV to standby mode if no signal is

received for 30 seconds in the PC input.

010COV.book Page 26 Wednesday, October 1, 2008 10:51 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony bravia kdl-32e4000 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony bravia kdl-32e4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info