Bedienungsanleitung Sony bravia kdl-32e4000 (Seite 29 von 36) (Englisch)

141911

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Using MENU Functions

4 Press F/f to select one of the following TV broadcast systems, then press

RETURN.

B/G: For western European countries/regions

I: For the United Kingdom

D/K: For eastern European countries/regions

L: For France

5 Press F/f to select “Channel”, then press .

6 Press

F/f to select “S” (for cable channels) or “C” (for terrestrial channels),

then press

7 Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. When a channel has been found,

the search will stop. To continue searching, press

F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of the broadcast you want or

your

VCR/ DVD recorder channel number.

8 Press to jump to “Confirm”, then press .

9 Press

f to select “OK”, then press .

Repeat the procedure above to preset other channels manually.

Label

Assigns a name of your choice, up to five letters or numbers, to the selected

channel. This name will be displayed briefly on the screen when the channel is

selected.

To input characters, follow steps 1 to 3 of “Edit:” (page 27).

AFT

Allows you to fine-tune the selected programme number manually if you feel

that a slight tuning adjustment will improve the picture quality.

You can adjust the fine tuning over a range of –15 to +15. When “On” is

selected, the fine tuning is performed automatically.

Audio Filter

Improves the sound for individual channels in the case of distortion in mono

broadcasts. Sometimes a non-standard broadcast signal can cause sound

distortion or intermittent sound muting when watching mono programmes.

If you do not experience any sound distortion, we recommend that you leave this

option set to the factory setting “Off”.

You cannot receive stereo or dual sound when “Low” or “High” is selected.

LNA

Improves the picture quality for individual channels in the case of very weak

broadcast signals (noisy picture).

If you cannot see any improvement in the picture quality even if you set to “On”,

set this option to “Off” (factory setting).

Skip

Skips unused analogue channels when you press PROG +/– to select channels.

(You can still select a skipped channel using the number buttons.)

Decoder

Shows and records the scrambled channel selected when using a decoder

connected directly to scart connector / AV1, or to scart connector

/ / AV2 via a VCR/DVD recorder.

Depending on the country/region selected for “Country” (page 7), this option may not be

available.

Confirm

Saves changes made to the “Manual Programme Preset” settings.

Continued

010COV.book Page 29 Wednesday, October 1, 2008 10:51 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony bravia kdl-32e4000 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony bravia kdl-32e4000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info