Bedienungsanleitung Sony CCD-TR317 (Seite 57 von 68) (Englisch)

49817

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Additional Information

Precautions

Camcorder operation

• Operate your camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor).

• For DC or AC operation, use the accessories recommended in this operating

instructions.

• If any solid object or liquid get inside the casing, unplug your camcorder and have it

checked by a Sony dealer before operating it any further.

• Avoid rough handling or mechanical shock. Be particularly careful of the lens.

•Keep the POWER switch set to OFF (CHARGE) when you are not using your

camcorder.

• Do not wrap your camcorder with a towel, for example, and operate it. Doing so

might cause heat to build up inside.

• Keep your camcorder away from strong magnetic fields or mechanical vibration.

On handling tapes

Do not insert anything into the small holes on the rear of the cassette. These holes are

used to sense the type and thickness of the tape and if the recording tab is in or out.

Camcorder care

• When your camcorder is not to be used for a long time, remove the battery.

• Remove the tape, and periodically turn on the power, operate the CAMERA and

PLAYER sections and play back a tape for about 5 minutes when your camcorder is

not to be used for a long time.

• Clean the lens with a soft brush to remove dust. If there are fingerprints on the lens,

remove them with a soft cloth.

• Clean the camcorder body with a dry soft cloth, or a soft cloth lightly moistened with

a mild detergent solution. Do not use any type of solvent which may damage the

finish.

• Do not let sand get into your camcorder. When you use your camcorder on a sandy

beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause

your camcorder to malfunction, and sometimes this malfunction cannot be repaired.

AC power adaptor

• Unplug the unit from a wall outlet when you are not using the unit for a long time. To

disconnect the power cord, pull it out by the plug. Never pull the power cord itself.

• Do not operate the unit with a damaged cord or if the unit has been dropped or

damaged.

• Do not bend the power cord forcibly, or place a heavy object on it. This will damage

the cord and may cause fire or electrical shock.

• Prevent metallic objects from coming into contact with the metal parts of the

connecting section. If this happens, a short may occur and the unit may be damaged.

• Always keep metal contacts clean.

• Do not disassemble the unit.

• Do not apply mechanical shock or drop the unit.

• While the unit is in use, particularly during charging, keep it away from AM receivers

and video equipment. AM receivers and video equipment disturb AM reception and

video operation.

• The unit becomes warm during use. This is not a malfunction.

• Do not place the unit in locations that are:

– Extremely hot or cold

– Dusty or dirty

– Very humid

– Vibrating

Maintenance information and precautions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CCD-TR317 Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CCD-TR317

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info