50013
72
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
72
To write the RC time code from the
end of the RC time code recorded
portion
Rewind the tape to the portion on which the RC
time code has been written and set the camcorder
to playback pause mode. Then follow steps 3
and 4 above. The RC time code is written
continuously.
Notes on writing the RC time code
The RC time code writing stops when:
- you press TIME CODE WRITE again before
starting playback.
- you press INDEX or DATE SEARCH before
starting playback.
- you change from playback mode to another
mode.
When you are writing the RC time code from
the middle of a tape without the time code
written, writing starts several frames before the
current picture.
If you write the RC time code on a recorded
tape, the Data Code is erased.
You can mark the RC time code on a tape
recorded both in LP mode and SP mode, the RC
time code written in LP mode, however, may
not be read correctly.
You cannot mark the RC time code on an
NTSC-recorded tape.
You cannot mark the RC time code on a tape
with the red mark on the cassette exposed.
A black band appears when you mark the RC
time code during playback, and the sound
cannot be heard. This does not affect the
picture and sound that are already recorded.
Note on --:--:--:-- indicator
The --:--:--:-- indicator appears during playback
if:
nothing is recorded.
the RC time code is unreadable because of the
damage of the tape or because of the noise.
you recorded using another VCR without RC
time code function.
Writing the RC time code on a
recorded tape
Запись временного кода RC на
записанной ленте
Для записи временного кода RC от
конца записанной части с временным
кодом RC
Перемотайте ленту назад до части, на
которой был записан временной код RC, и
установите видеокамеру на режим паузы
воспроизведения. Затем следуйте
вышеописанным пунктам 3 и 4. Временной
код RC будет записан без перерыва.
Примечания к записи временного кода RC
Запись временного кода RC отменяется,
когда:
Вы нажимаете TIME CODE WRITE снова
до начала воспроизведения.
Вы нажимаете INDEX или DATE SEARCH
до начала воспроизведения.
Вы изменяете режим воспроизведения на
другой режим.
Если Вы записываете временной код RC с
середины ленты, на которой не записан
временной код RC, запись временного кода
начнется на несколько кадров раньше
текущего изображения.
Если Вы записываете временной код RC на
записанную ленту, то код данных
стирается.
Вы можете записать временной код RC на
ленту, записанную и в режиме LP и в
режиме SP, однако временной код RC,
записанный в режиме LP, не может быть
считан правильно.
Вы не можете записать временной код RC
на ленте, записанной в системе NTSC.
Вы не можете записать временной код RC
на ленте, если на кассете видна красная
метка.
Черная полоса появляется, когда вы
записываете временной код RC во время
воспроизведения, и звук прослушиваться не
будет. Это не влияет на звук и изображение
которые уже записаны.
Примечание к индикатору --:--:--:--
Индикатор --:--:--:-- появляется во время
воспроизведения, если:
ничего не было записано.
временной код RC не считывается из-за
повреждения ленты или из-за помех.
Вы произвели запись с использованием
другого КВМ без функции временного кода
RC.
72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sony CCD-TR840E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sony CCD-TR840E

Sony CCD-TR840E Bedienungsanleitung - Deutsch - 116 seiten

Sony CCD-TR840E Bedienungsanleitung - Holländisch, Französisch - 116 seiten

Sony CCD-TR840E Bedienungsanleitung - Italienisch - 116 seiten

Sony CCD-TR840E Bedienungsanleitung - Portugiesisch, Spanisch - 116 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info