Bedienungsanleitung Sony CDP-CA9ES (Seite 12 von 58) (Französisch, Spanisch)

50406

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

Playing CDs

You can create your programme while checking the

disc labels

While the disc tray is open, follow Steps 1 to 5 with

pressing DISC SKIP to check the disc labels. If you close

the disc tray before Step 5, the total playing time appears

in the display after a while.

Note that, if the programmed track number isn’t found

on the disc, that step is automatically erased.

The programme remains even after the Programme

Play ends

When you press (, you can play the same programme

again.

The programme remains until you erase it

If you replace discs, the programmed disc and track

numbers remain. So, the player plays only the existing

disc and track numbers. However, the disc and track

numbers that aren’t found in the player or on the disc are

deleted from the programme, and the rest of the

programme is played in the programmed order.

Note

The total playing time doesn’t appear when:

—You have programmed a track whose number exceeds 20.

—The total playing time of the programme exceeds 200

minutes.

Checking the track order

You can check your programme before or after you

start playing.

Press CHECK on the remote.

Each time you press this button, the display shows the

disc and track number of each step in the programmed

order. (When a whole disc is programmed as one step,

“AL” appears instead of the track number.) After the

last step in the programme, the display shows

“–END–” and returns to the original display. If you

check the order after you start playing, the display

shows only the remaining steps.

Changing the track order

You can change your programme before you start

playing.

Erase a step

Erase the last step in

the programme

Add steps to the end

of the programme

Change the whole

programme

completely

You need to

Press CHECK until the track or disc

you don’t want appears in the

display, then press CLEAR

Press CLEAR. Each time you press

the button, the last track or disc will

be cleared.

Follow Steps 2 to 4 in “Creating Your

Own Programme” on page 11

Hold down CLEAR until “ALL

CLEAR” appears in the display to

erase the whole programme, then

create a new programme following

Steps 2 to 4 in “Creating Your Own

Programme” on page 11

Playing Using a Timer

(CDP-CA9ES only)

You can start playing a disc at any time you want by

connecting a timer (not supplied). Please also refer to

the instructions for the timer if you need help.

TIMER

1 Press one of the play mode buttons to select the

play mode you want.

2 Set TIMER on the player to PLAY.

3 Set the timer to the time you want.

The player turns off. When the set time comes, the

player turns on and starts playing.

4 After you have used the timer, set TIMER on the

player to OFF.

Play mode buttons

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-CA9ES Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-CA9ES

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info