Bedienungsanleitung Sony CDP-CE275 (Seite 11 von 32) (Englisch, Französisch)

50421

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Playing CDs

Programming the CD

tracks

You can arrange the order of the tracks on the

discs and create your own program. The

program can contain up to 32 “steps” — one

“step” may contain a track or a whole disc.

1 Press PLAY MODE repeatedly until

“PROGRAM” appears in the display

before you start playing.

If a program is already stored, the last step

of the program appears in the display. When

you want to erase the whole program, hold

down CLEAR until “ALL CLr” appears in

the display (see page 12).

2 Press DISC 1 – 5 to select the disc.

“AL” in the display stands for “all” tracks.

When you want to program the whole disc

as one step, skip Step 3, and go to Step 4.

3 Turn lAMSL until the track you

want appears and push lAMSL to

select the track.

The track number that you programmed, the

playing order, and the total playing time

appear in the display.

If you’ve made a mistake

Press CLEAR, then repeat Step 2.

Tip

You can select the track using the number buttons

on the remote. To select a track with a number

over 10, use >10 (see page 9).

4 To program other discs or tracks, do

the following:

5 Press H to start Program Play.

To cancel Program Play

Press PLAY MODE.

Tips

• You can create your program while checking the

disc labels.

While the disc tray is open, follow Steps 1 to 4 with

pressing the DISC SKIP button to check the disc

labels. If you close the disc tray before Step 5, the

total playing time appears in the display after a

while.

Note that, if the programmed track number isn’t

found on the disc, that step is automatically erased.

• The program remains even after the Program Play

ends. When you press the H button, you can play

the same program again.

• The program remains until you erase it or turn off

the player. If you replace discs, the programmed

disc and track numbers remain. So, the player plays

only the existing disc and track numbers. However,

the disc and track numbers that aren’t found in the

player or on the disc are deleted from the program,

and the rest of the program is played in the

programmed order.

• For the recording to the A side or B side of the

cassette tape, you can pause Program Play.

Note

The total playing time doesn’t appear when:

—You have programmed a track whose number

exceeds 20.

—The total playing time of the program exceeds 200

minutes.

Checking the track order

You can check your program before or after

you start playing.

Press CHECK.

Each time you press this button, the display

shows the track (the disc and track numbers) or

the disc (the disc number and “AL” indication)

of each step in the programmed order. After the

last step in the program, the display shows

“End” and returns to the original display. If you

check the order after you start playing, the

display shows only the remaining steps.

To program

Other discs

Other tracks on the

same disc

Other tracks on

other discs

Repeat Step(s)

2 and 3

continued

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-CE275 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info