Bedienungsanleitung Sony CDP-CE405 (Seite 19 von 78) (Englisch, Französisch, Spanisch, Schwedisch)

50436

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Additional InformationAdditional Information

Additional Information

Troubleshooting

If you experience any of the following difficulties while

using the player, use this troubleshooting guide to help

you remedy the problem. Should any problem persist,

consult your nearest Sony dealer.

There’s no sound.

/Check that the player is connected securely.

/Make sure you operate the amplifier correctly.

/Adjust the playback level using the PHONE

LEVEL control on the player (CDP-CE505 only)

or LINE OUT LEVEL +/– on the remote.

(except for CDP-CE305 and CDP-C661)

The CD does not play.

/There’s no CD inside the player (“no DISC”

appears). Insert a CD.

/Place the CD with the label side up on the disc

tray correctly.

/Clean the CD (see page 18).

/Moisture has condensed inside the player.

Remove the disc and leave the player turned on

for about an hour (see page 2).

The remote does not function. (except for CDP-CE305 and

CDP-C661)

/Remove the obstacles in the path of the remote

and the player.

/Point the remote at the remote sensor g on the

player.

/Replace all the batteries in the remote with new

ones if they are weak.

The player functions incorrectly.

/The microcomputer chips may be operating

incorrectly. Turn the power off, then turn it

back on to reset the player.

Specifications

Compact disc player

Laser Semiconductor laser (λ = 780 nm)

Emission duration: continuous

Laser output Max 44.6 µW*

* This output is the value measured at

a distance of 200 mm from the

objective lens surface on the Optical

Pick-up block with 7 mm aperture.

Frequency response 2 Hz to 20 kHz ± 0.5 dB

Signal-to-noise ratio CDP-CE505: More than 107 dB

CDP-CE405/CE305/C661: More than

102 dB

Dynamic range More than 98 dB

Harmonic distortion CDP-CE505: Less than 0.0035%

CDP-CE405/CE305/C661: Less than

0.0045%

Channel separation More than 100 dB

Output

Jack

type

Phono

jacks

Optical

output

connector

Stereo

phone jack

Maximum

output

level

2 V

(at 50 kilohms)

–18dBm

10 mW

Load

impedance

Over 10 kilohms

Wave length: 660nm

32 ohms

LINE OUT

DIGITAL OUT

(OPTICAL)

(CDP-CE505

only)

PHONES

(CDP-CE505

only)

Where purchased␣

Europe, China, and

Singapore (except for the

CDP-C661 in Singapore)

Canada

Other countries, and the

CDP-C661 in Singapore

Power requirements

220 V – 230 V AC, 50/60 Hz

120 V AC, 60 Hz

110 V – 120 V or 220 V – 240 V AC,

adjustable, 50/60 Hz

General

Power requirements

Power consumption 14 W

Dimensions (approx.) 430 × 120 × 385 mm

(w/h/d) (17 × 4 3/4 × 15 1/4 in.) incl. projecting

parts

Mass (approx.) 5.6 kg (12 lbs 6 oz)

Supplied accessories

Audio cord (2 phono plugs – 2 phono plugs) (1)

Remote commander (remote) (except for CDP-CE305 and

CDP-C661) (1)

Sony SUM-3 (NS) batteries (except for CDP-CE305 and

CDP-C661) (2)

Design and specifications are subject to change without notice.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-CE405 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-CE405

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info