Bedienungsanleitung Sony CDP-CE415 (Seite 19 von 24) (Englisch)

50440

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Recording From CDsRecording From CDs

Recording From CDs

Recording From CDsRecording From CDs

Recording From CDs

Recording Your Own Program

You can record the program you’ve created on a tape,

etc. The program can contain up to 32 steps.

By inserting a pause during programming, you can

divide the program into two for recording on both

sides of a tape.

1 Create your program (for side A when recording

on a tape) while checking the total playing time

indicated in the display.

Follow Steps 1 through 5 in “Creating a program

on the player” on page 15.

The

indication appears in the display.

2 When you record on both sides of the tape, press

P to insert a pause.

The “P” and

A B

indications appear in the display

and the playing time is reset to “0.00.”

When you record on one side of the tape, skip this

step and go to Step 4.

A pause is counted as one step

You can program up to 31 steps when you insert a pause.

3 Repeat Steps 2 through 5 in “Creating a program

on the player” to create the program for side B.

4 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the player

pauses at the end of the program for side A.

5 When you record on side B, reverse the tape and

press · or P on the player to resume playing.

To check and change your program

See page 17.

The

indication appears while checking the program

for side A and

while checking the program for side

Recording a CD by Specifying

Tape Length (Time Edit)

(CDP-CE415 only)

You can have the player create a program that will fit

the length of the tape.

The player automatically creates a program, keeping

the original order of the disc.

The program can contain up to 32 steps (a pause

inserted between steps is counted as one step).

Note that tracks numbered over 20 cannot be

programmed automatically.

(Continued)

1 Press DISC SKIP to select the disc.

2 Press EDIT/TIME FADE repeatedly before you

start playing until “EDIT” appears and “A” in the

indication flashes in the display.

3 Press 0 or ) to specify the tape length.

Each time you press these buttons, the display

changes as shown below, with the tape length of

one side following each indication.

n C-46 ˜ C-54 ˜ C-60 ˜ C-74 ˜ C-90 ˜ - -. - - N

(23.00) (27.00) (30.00) (37.00) (45.00)

4 Press EDIT/TIME FADE to have the player create

the program.

The display shows the tracks to be recorded. “B” in

the

indication flashes in the display.

5 When you record on both sides of the tape, press

EDIT/TIME FADE again.

The player inserts a pause, then creates the

program for side B. The display shows the

programmed tracks.

When you record on one side of the tape, skip this

step.

6 Start recording on the deck and then press · on

the player.

When you record on both sides of the tape, the

player pauses at the end of the program for side A.

EDIT/TIME FADE

0/)

PROGRAM DISC 1 – 5

P·

≠ AMS ±

DISC SKIP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sony CDP-CE415 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sony CDP-CE415

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info